数据搜索系统,热门电子元器件搜索
  Chinese  ▼
ALLDATASHEETCN.COM

X  

LCW-G6SP 数据表(PDF) 21 Page - OSRAM GmbH

部件名 LCW-G6SP
功能描述  white P-LCC-6 package, colored diffused silicone resin
PDF  21 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
制造商  OSRAM [OSRAM GmbH]
网页  http://www.osram.com
标志 OSRAM - OSRAM GmbH

LCW-G6SP 数据表(HTML) 21 Page - OSRAM GmbH

Back Button LCW-G6SP Datasheet HTML 13Page - OSRAM GmbH LCW-G6SP Datasheet HTML 14Page - OSRAM GmbH LCW-G6SP Datasheet HTML 15Page - OSRAM GmbH LCW-G6SP Datasheet HTML 16Page - OSRAM GmbH LCW-G6SP Datasheet HTML 17Page - OSRAM GmbH LCW-G6SP Datasheet HTML 18Page - OSRAM GmbH LCW-G6SP Datasheet HTML 19Page - OSRAM GmbH LCW-G6SP Datasheet HTML 20Page - OSRAM GmbH LCW-G6SP Datasheet HTML 21Page - OSRAM GmbH  
Zoom Inzoom in Zoom Outzoom out
 21 / 21 page
background image
LCW G6SP
2010-03-16
21
Fußnoten:
1)
Helligkeitswerte
werden
mit
einer
Stromeinprägedauer
von
25 ms
und
einer
Genauigkeit von
± 11% ermittelt.
2)
Wegen der besonderen Prozessbedingungen bei der
Her-
stellung
von
LED
können
typische
oder
abgeleitete
technische
Parameter
nur
aufgrund
statistischer Werte wiedergegeben werden. Diese
stimmen nicht notwendigerweise mit den Werten
jedes einzelnen Produktes überein, dessen Werte sich
von typischen und abgeleiteten Werten oder typischen
Kennlinien unterscheiden können. Falls erforderlich,
z.B. aufgrund technischer Verbesserungen, werden
diese typischen Werte ohne weitere Ankündigung
geändert.
3)
-
4)
Montage auf PC-Board - Metallkernplatine, Fläche
950 mm² pro LED. Für weitere Informationen siehe
Applikationsschrift im Internet (www.osram-os.com).
5)
Farbortgruppen werden mit einer Stromeinprägedauer
von 25 ms und einer Genauigkeit von ±0.01 ermittelt.
6)
Spannungswerte
werden
mit
einer
Stromeinprägedauer von 1 ms und einer Genauigkeit
von ±0,1 V ermittelt.
7)
Im gestrichelten Bereich der Kennlinien muss mit
erhöhten
Helligkeitsunterschieden
zwischen
Leuchtdioden innerhalb einer Verpackungseinheit
gerechnet werden.
8)
Maße werden wie folgt angegeben: mm (inch)
9)
Gehäuse hält TTW-Löthitze aus nach CECC 00802.
Das Gehäuse ist auf Grund der Beinchengeometrie
nicht für TTW-Löten empfohlen, da sich Lötbrücken
bilden können.
10) Ein kritisches Bauteil ist ein Bauteil, das in
lebenserhaltenden
Apparaten
oder
Systemen
eingesetzt wird und dessen Defekt voraussichtlich zu
einer
Fehlfunktion
dieses
lebenserhaltenden
Apparates oder Systems führen wird oder die
Sicherheit oder Effektivität dieses Apparates oder
Systems beeinträchtigt.
11) Lebenserhaltende Apparate oder Systeme sind für
(a) die Implantierung in den menschlichen Körper
oder
(b) für die Lebenserhaltung bestimmt.
Falls sie versagen, kann davon ausgegangen werden,
dass die Gesundheit und das Leben des Patienten in
Gefahr ist.
Published by
OSRAM Opto Semiconductors GmbH
Wernerwerkstrasse 2, D-93049 Regensburg
www.osram-os.com
© All Rights Reserved.
Remarks:
1)
Brightness groups are tested at a current pulse
duration of 25 ms and a tolerance of
± 11%.
2)
Due to the special conditions of the manufacturing
processes of LED, the typical data or calculated
correlations of technical parameters can only reflect
statistical
figures.
These
do
not
necessarily
correspond to the actual parameters of each single
product, which could differ from the typical data and
calculated correlations or the typical characteristic
line.
If
requested,
e.g.
because
of
technical
improvements, these typ. data will be changed without
any further notice.
3)
-
4)
Mounted on PC board - metall core PCB, area of
950 mm² per LED. For further information please find
the
application
note
on
our
web
site
(www.osram-os.com).
5)
Chromaticity coordinate groups are tested at a current
pulse duration of 25 ms and a tolerance of ±0.01.
6)
Forward voltages are tested at a current pulse
duration of 1 ms and a tolerance of ±0.1 V.
7)
In the range where the line of the graph is broken, you
must expect higher brightness differences between
single LEDs within one packing unit.
8)
Dimensions are specified as follows: mm (inch).
9)
Package able to withstand TTW-soldering heat acc. to
CECC 00802.
The package is not recommended for TTW soldering
because a short cut between the contacts can occure.
10) A critical component is a component used in a
life-support device or system whose failure can
reasonably be expected to cause the failure of that
life-support device or system, or to affect its safety or
the effectiveness of that device or system.
11) Life support devices or systems are intended
(a) to be implanted in the human body,
or
(b) to support and/or maintain and sustain human life.
If they fail, it is reasonable to assume that the health
and the life of the user may be endangered.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21


数据表 下载

Go To PDF Page


链接网址



ALLDATASHEET是否为您带来帮助?  [ DONATE ] 

关于 Alldatasheet   |   广告服务   |   联系我们   |   隐私政策   |   数据表链接    |   链接交换   |   制造商名单
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com