2

D2FS

Ultra Subminiature Basic Switch

Ratings

Note: The rating values apply under the following test conditions.

Ambient temperature: 20

± 2°C

Ambient humidity: 65

± 5%

Operating frequency: 20 operations/min

Characteristics

Note: The data given above are initial values.

*1. The values are at Free Position and Total Travel Position values for pin plunger, and Total Travel Position value for lever.

Close or open circuit of the contact is 1 ms max.

*2. For testing conditions, consult your OMRON sales representative.

Rated voltage

Resistive load

6 VDC

0.1 A

Operating speed

Pin plunger models: 1 mm to 500 mm/s

Lever models: 5 mm to 500 mm/s

Operatiing frequency

Mechanical

Pin plunger models: 200 operations/min max.

Lever models: 100 operations/min max.

Electrical

30 operations/min max.

Insulation resistance

100 M

Ω min. (at 500 VDC)

Contact resistance (initial value)

100 m

Ω max.

Dielectric strength

Between terminals of same polarity

600 VAC 50/60 Hz 1 min

Between current carrying metal parts and ground

1,500 VAC 50/60 Hz 1 min

Between each terminal and non-current carrying

metal part

Vibration resistance

Malfunction *1

10 to 55 Hz, 1.5 mm double amplitude

Shock resistance

Destruction

Malfunction *1

Durability *2

Mechanical

100,000 operations min. (at 30 ops./min.)

Electrical

10,000 operations min. (at 30 ops./min.)

Degree of protection

IP40

Ambient operatingtamperature

–20 to +70°C (at 60%RH Max.) (with no icing or condensation)

Ambient operation humidity

85%RH max. (for +5 to +35°C)

Weight

Approx. 0.5 g (pin plunger models)