https://www.phoenixcontact.com/us/products/2903359

3/7/14   Page 2 / 5

Relay Module - RIF-0-RPT-24DC/ 1AU - 2903359

Technical data

Contact side

Contact type

1 N/O contact

Contact material

AgSnO, hard gold-plated

Maximum switching voltage

30 V AC

36 V DC

Minimum switching voltage

100 mV (at 10 mA)

Maximum inrush current

50 mA

Min. switching current

1 mA (at 12 V)

Limiting continuous current

50 mA

Interrupting rating (ohmic load) max.

1.2 W (at 24 V DC)

Switching capacity in acc. with DIN VDE 0660/IEC 60947

1 A (24 V (DC13))

3 A (230 V (AC 15))

Note

the following values are applicable if a gold layer is destroyed

Maximum switching voltage

250 V AC/DC

Minimum switching voltage

5 V (at 100 mA)

Limiting continuous current

6 A

Min. switching current

10 mA (at 12 V)

Interrupting rating (ohmic load) max.

140 W (at 24 V DC)

20 W (at 48 V DC)

18 W (at 60 V DC)

23 W (at 110 V DC)

40 W (at 220 V DC)

1500 VA (for 250 V AC)

Connection data

Connection method

Push-in connection

Conductor cross section solid min.

0.14 mm²

Conductor cross section solid max.

1.5 mm²

Conductor cross section stranded min.

0.14 mm²

Conductor cross section stranded max.

1.5 mm²

Conductor cross section stranded, with ferrule with plastic sleeve min.

0.14 mm²

Conductor cross section stranded, with ferrule with plastic sleeve max.

1.5 mm²

Conductor cross section stranded, with ferrule without plastic sleeve min.

0.14 mm²

Conductor cross section stranded, with ferrule without plastic sleeve max. 1.5 mm²

Conductor cross section AWG/kcmil min.

26

Conductor cross section AWG/kcmil max

16

Stripping length

8 mm

General