https://www.phoenixcontact.com/us/products/2903308

3/7/14   Page 2 / 6

Relay Module - RIF-2-RPT-LDP-24DC/4X21 - 2903308

Technical data

Coil side

Protective circuit

Damping diode

Contact side

Contact type

4 PDTs

Contact material

AgNi

Maximum switching voltage

250 V AC/DC

Minimum switching voltage

5 V (At 24 mA)

Maximum inrush current

16 A (20 ms, N/O contact)

Min. switching current

5 mA (at 24 V)

Limiting continuous current

6 A (see diagram)

Interrupting rating (ohmic load) max.

144 W (at 24 V DC)

124 W (at 48 V DC)

108 W (at 60 V DC)

52 W (at 110 V DC)

48 W (at 220 V DC)

1500 VA (for 250 V AC)

Switching capacity in acc. with DIN VDE 0660/IEC 60947

2 A (24 V (DC13))

1 A (230 V (AC 15))

Connection data

Connection method

Push-in connection

Conductor cross section solid min.

0.14 mm²

Conductor cross section solid max.

1.5 mm²

Conductor cross section stranded min.

0.14 mm²

Conductor cross section stranded max.

1.5 mm²

Conductor cross section stranded, with ferrule with plastic sleeve min.

0.14 mm²

Conductor cross section stranded, with ferrule with plastic sleeve max.

1.5 mm²

Conductor cross section stranded, with ferrule without plastic sleeve min.

0.14 mm²

Conductor cross section stranded, with ferrule without plastic sleeve max. 1.5 mm²

Conductor cross section AWG/kcmil min.

26

Conductor cross section AWG/kcmil max

16

Stripping length

8 mm

General

Test voltage relay winding/relay contact

Test voltage relay contact/relay contact

Operating mode

100% operating factor

Degree of protection

IP20 (Relay socket)

RT I (Relay)