https://www.phoenixcontact.com/us/products/2912620

10/27/2014   Page 2 / 6

Relay Module - PLC-RSP-230UC/21-21AU - 2912620

Technical data

Ambient conditions

Ambient temperature (operation)

-40 °C ... 55 °C

Ambient temperature (storage/transport)

-40 °C ... 85 °C

Coil side

230 V AC (220 V DC)

220 V DC

4.3 mA (at 220 V DC)

4.5 mA (for 230 V AC)

Typical response time

7 ms

Typical release time

10 ms

Operating voltage display

Yellow LED

Protective circuit

Bridge rectifier Bridge rectifier

Contact side

Contact type

2 PDT

Contact material

AgNi, hard gold-plated

Maximum switching voltage

30 V AC

36 V DC

Minimum switching voltage

100 mV (at 10 mA)

Maximum inrush current

50 mA

Min. switching current

1 mA (at 24 V)

Limiting continuous current

50 mA

Interrupting rating (ohmic load) max.

1.2 W (at 24 V DC)

Note

the following values are applicable if a gold layer is destroyed

Maximum switching voltage

250 V AC/DC

Minimum switching voltage

5 V AC/DC

Limiting continuous current

6 A

Maximum inrush current

15 A (300 ms)

Min. switching current

10 mA

Interrupting rating (ohmic load) max.

140 W (at 24 V DC)

85 W (at 48 V DC)

60 W (at 60 V DC)

44 W (at 110 V DC)

60 W (at 220 V DC)

1500 VA (for 250 V AC)

Switching capacity in acc. with DIN VDE 0660/IEC 60947

2 A (at 24 V, DC13)

0.2 A (at 110 V, DC13)

0.2 A (at 250 V, DC13)