HSMx-A10x-xxxxx Data Sheet

PLCC-2, Surface Mount LED Indicator

Broadcom

AV02-0198EN

16



If the LED is intended to be used in harsh or outdoor

environment, protect the LED against damages caused

by rain water, water, dust, oil, corrosive gases, external

mechanical stresses, and so on.

Thermal Management

The optical, electrical, and reliability characteristics of the

LED are affected by temperature. Keep the junction

where;

(°C/W)

and is usually not known.

temperature, TS as follows:

where;

following figure (°C)

(°C/W)

Figure 16: Solder Point Temperatures on PCB

final product to ensure that the LEDs are operating within all

maximum ratings stated in the data sheet.

Eye Safety Precautions

LEDs may pose optical hazards when in operation. Do not

look directly at operating LEDs because it might be harmful

to the eyes. For safety reasons, use appropriate shielding or

personal protective equipment.

Ts point

Package mark