LT6014IS8 datasheet(1/16 Pages) LINER

部件名	LT6014IS8

功能描述	Single/Dual 145UA, 9.5nV/ SIGMAHz, AV >5, Rail-to-Rail Output Precision Op Amps

PDF	16 Pages

Scroll/Zoom	100%

制造商	LINER [Linear Technology]

网页	http://www.linear.com

标志

1 / 16 page

LT6013/LT6014

1

60134fa

Single/Dual 145

µA,

9.5nV/

√Hz, AV ≥5, Rail-to-Rail

Output Precision Op Amps

APPLICATIO S

FEATURES

TYPICAL APPLICATIO

DESCRIPTIO

s

Thermocouple Amplifiers

s

Precision Photodiode Amplifiers

s

Instrumentation Amplifiers

s

Battery-Powered Precision Systems

s

Low-Voltage Precision Systems

s

Micro-Power Sensor Interface

s

35

µV Maximum Offset Voltage (LT6013A)

s

Low 1/f Noise: 200nVP-P (0.1Hz to 10Hz)

40nVRMS (0.1Hz to 10Hz)

s

Low White Noise: 9.5nV/

√Hz (1kHz)

s

Rail-to-Rail Output Swing

s

145

µA Supply Current per Amplifier

s

250pA Maximum Input Bias Current (LT6013A)

s

AV ≥5 Stable; Up to 500pF CLOAD

s

0.2V/

µs Slew Rate

s

1.4MHz Gain Bandwidth Product

s

120dB Minimum Voltage Gain, VS = ±15V

s

0.8

µV/°C Maximum VOS Drift

s

2.7V to

±18V Supply Voltage Operation

s

Operating Temperature Range: – 40

°C to 85°C

s

Available in SO-8 and Space Saving 3mm

× 3mm

DFN Packages

, LTC and LT are registered trademarks of Linear Technology Corporation.

The LT

®6013 and LT6014 op amps combine low noise and

high precision input performance with low power con-

sumption and rail-to-rail output swing. The amplifiers are

stable in a gain of 5 or more and feature greatly improved

CMRR and PSRR versus frequency compared to other

precision op amps.

Input offset voltage is factory-trimmed to less than 35

µV.

The low drift and excellent long-term stability ensure a

high accuracy over temperature and time. The 250pA

maximum input bias current and 120dB minimum voltage

gain further maintain this precision over operating

conditions.

The LT6013 and LT6014 operate from any supply voltage

from 2.7V to 36V and draw only 145

µA of supply current

per amplifier on a 5V supply. The output swings to within

40mV of either supply rail, making the amplifiers very

useful for low voltage single supply operation.

The amplifiers are fully specified at 5V and

±15V supplies

and from –40

°C to 85°C. The single LT6013 and dual

LT6014 are both available in SO-8 and space saving

3mm

× 3mm DFN packages. For unity gain stable ver-

sions, refer to the LT6010 and LT6011 data sheets.

Gain of 10 Single Ended to Differential Converter

–

+

1/2 LT6014

V+

V–

8.06k

2k

VIN

5 • VIN

60134 TA01a

+

–

1/2 LT6014

10k

2k

–5 • VIN

LT6013/LT6014 0.1Hz to 10Hz Voltage Noise

TIME (SEC)

0

8

60134 TA01b

246

10

7

135

9

VS = 5V, 0V

TA = 25°C

EQUIVALENT RMS VOLTAGE = 40nVRMS

类似零件编号 - LT6014IS8

制造商	部件名	数据表	功能描述
Linear Technology	LT6014	343Kb / 16P	Rail-to-Rail Output Precision Op Amps
Linear Technology	LT6014	343Kb / 16P	Rail-to-Rail Output Precision Op Amps

More results

类似说明 - LT6014IS8

制造商	部件名	数据表	功能描述
Linear Technology	LT1218	375Kb / 16P	Precision Rail-to-Rail Input and Output Op Amps
	LT1884	178Kb / 12P	Dual/Quad Rail-to-Rail Output, Picoamp Input Precision Op Amps
	LT1672	211Kb / 12P	2MMax, AV=>5 SINGLE, DUAL AND QUAD OVER-THE-TOP PRECISION RAIL-TO-RAIL INPUT AND OUTPUT OP AMPS
Intersil Corporation	ISL28276	530Kb / 12P	Dual Precision Micropower Single Supply Rail-to-Rail Input and Output Precision Op-Amps June 23, 2006
Linear Technology	LT1885	174Kb / 12P	Dual/Quad Rail-to-Rail Output, Picoamp Input Precision Op Amps
	LT1218	327Kb / 16P	Precision Rail-to-Rail Input and Output Op Amps
	LT1219	327Kb / 16P	Precision Rail-to-Rail Input and Output Op Amps
	LT6013	343Kb / 16P	Rail-to-Rail Output Precision Op Amps
	LT6014	343Kb / 16P	Rail-to-Rail Output Precision Op Amps
Intersil Corporation	ISL28236FBZ	694Kb / 15P	5MHz, Dual Precision Rail-to-Rail Input-Output (RRIO) Op Amps July 24, 2014