| 数据搜索系统,热门电子元器件搜索 |
|
LAN91C110 数据表(PDF) 21 Page - SMSC Corporation |
|
|
|||||||||||||||||||||||||||||
LAN91C110 数据表(HTML) 21 Page - SMSC Corporation |
|
21 / 55 page ![]() FEAST Fast Ethernet Controller for PCMCIA and Generic 16-Bit Applications SMSC DS – LAN91C110 REV. B Page 21 Rev. 09/05/02 All memory related information is represented in 256 * M byte units, where the multiplier M is determined by the MCR upper byte. These register default to FFh, which should be interpreted as 256. BANK 0 OFFSET NAME TYPE SYMBOL A MEMORY CONFIGURATION REGISTER Lower Byte - READ/WRITE Upper Byte - READ ONLY MCR HIGH BYTE MEMORY SIZE MULTIPLIER 0 0 1 1 0 1 0 1 LOW BYTE MEMORY RESERVED FOR TRANSMIT (IN BYTES * 256 * M) 0 0 0 0 0 0 0 0 MEMORY RESERVED FOR TRANSMIT - Programming this value allows the host CPU to reserve memory to be used later for transmit, limiting the amount of memory that receive packets can use. When programmed for zero, the memory allocation between transmit and receive is completely dynamic. When programmed for a non-zero value, the allocation is dynamic if the free memory exceeds the programmed value, while receive allocation requests are denied if the free memory is less or equal to the programmed value. This register defaults to zero upon reset. It is not affected by the RESET MMU command. The value written to the MCR is a reserved memory space IN ADDITION TO ANY MEMORY CURRENTLY IN USE. If the memory allocated for transmit plus the reserved space for transmit is required to be constant (rather than grow with transmit allocations) the CPU should update the value of this register after allocating or releasing memory. The contents of the MIR as well as the low byte of the MCR are specified in units of 256 * M bytes, where M is the Memory Size Multiplier. M=2 for the LAN91C110. A value of 04h in the lower byte of the MCR is equal to one 2K page (4 * 256 *2 = 2K); since memory must be reserved in multiples of pages, bits 0 and 1 of the MCR should be written to 1 only when the entire memory is being reserved for transmit (i.e., low byte of MCR = FFh). |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |