P1696

LINEAR INTEGRATED CIRCUIT

UNISONICTECHNOLOGIESCO.,LTD

7 of 7

www.unisonic.com.tw

QW-R103-035.H

■

FUNCTION DESCRIPTION

The changes of output load can cause the output voltage changes. The changes can be sensed by FB pin. The

output of error amplifier controlling output duty circle makes the output stable.

The P1696 incorporates an over current protection internally. Once the output is in overcurrent, power transistor

must be turned off immediately. In that case, the power transistor will not be damaged by the excessive current.

If over-load or short-circuit condition happens, the oscillation frequency will be reduced, which make the power

transistor bears less heat, so the power transistor is protected from damage.

UTC assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or

other parameters) listed in products specifications of any and all UTC products described or contained

herein. UTC products are not designed for use in life support appliances, devices or systems where

malfunction of these products can be reasonably expected to result in personal injury. Reproduction in

whole or in part is prohibited without the prior written consent of the copyright owner. The information

presented in this document does not form part of any quotation or contract, is believed to be accurate

and reliable and may be changed without notice.