© 2015 Semiconductor Components Industries, LLC.

www.fairchildsemi.com

FUSB340 • Rev. 2

3

www.onsemi.com

Absolute Maximum Ratings

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be

operable above the recommended operating conditions and stressing the parts to these levels is not recommended.

In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.

The absolute maximum ratings are stress ratings only.

Symbol

Parameter

Min.

Max.

Unit

Supply Voltage

-0.5

6.0

V

-0.5

V

-0.3

2.1

V

DC Input Diode Current

-50

mA

DC Switch Current

25

mA

Storage Temperature

-65

+150

°C

MSL

Moisture Sensitivity Level (JEDEC J-STD-020A)

1

ESD

Human Body Model, JEDEC: JESD22-A114

All Pins

2

kV

IEC 61000-2-4, Level 4, for Switch Pins

Contact

8

Air

15

Charged Device Model, JESD22-C101

1

Notes:

1.

The input and output negative ratings may be exceeded if the input and output diode current ratings are observed.

2.

Recommended Operating Conditions

The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended

operating conditions are specified to ensure optimal performance to the datasheet specifications. ON Semiconductor

does not recommend exceeding them or designing to Absolute Maximum Ratings.

Symbol

Parameter

Min.

Max.

Unit

Supply Voltage

1.5

5.0

V

Power Supply Slew Rate

100

1000

µs/V

0

5.0

V

Switch I/O Voltage (Both SSUSB Switch Paths)

0

2.0

V

Operating Temperature

-40

+85

°C

Note:

3.

The control inputs must be held HIGH or LOW; they must not float.