www.onsemi.com

3

Absolute Maximum Ratings

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be

operable above the recommended operating conditions and stressing the parts to these levels is not recommended.

In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.

The absolute maximum ratings are stress ratings only.

Symbol

Parameter

Min.

Max.

Unit

Supply Voltage

-0.5

5.6

V

DC Input Voltage (S, /OE)

(1)

-0.5

V

DC Sw itch I/O Voltage

(1)

-0.5

5.25

V

DC Input Diode Current

-50

mA

DC Output Current

50

mA

Storage Temperature

-65

+150

°C

ESD

Human Body Model, JEDEC: JESD22-A114

All Pins

7

kV

I/O to GND

8

Pow er to GND

16

Charged Device Model, JEDEC: JESD22-C101

2

Note:

1.

The input and output negative ratings may be exceeded if the input and output diode current ratings are

observed.

Recommended Operating Conditions

The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended

operating conditions are specified to ensure optimal performance to the datasheet specifications. ON Semiconductor

does not recommend exceeding them or designing to Absolute Maximum Ratings.

Symbol

Parameter

Min.

Max.

Unit

Supply Voltage

3.0

4.4

V

Control Input Voltage (S, /OE)

(2)

0

V

Sw itch I/O Voltage

-0.5

4.5

V

Operating Temperature

-40

+85

°C

Note:

2.

The control input must be held HIGH or LOW and it must not float.