2

FH41 Series

■Product Specifications

Rating

Rated current 0.5A (Note 1)

Rated voltage AC 50Vrms

Operating temperature range:

−40 to +105ç (Note 2)

Operating humidity range:

Relative humidity of 90% or lower

(no dew condensation)

Storage temperature range:

−10 to +50ç (Note 3)

Storage humidity range:

Relative humidity of 90% or lower

(no dew condensation)

Applicable FPC and FFC

terminal specifications

t= 0.3 ±0.05, gold plating (GND plate: t= 0.5 ±0.05, tin plating)

Items

Specifications

Conditions

1. Insulation resistance Minimum of 500Mø

Measured at DC 100V.

2. Withstanding voltage No flashover or insulation damage

AC 150Vrms for 1 minute

3. Contact

resistance

Maximum of 100mø

*Incl. FFC conductor resistance

Measured at 1mA.

4. Repeated motions

Durability

Contact resistance : Maximum of 100mø

No damaged, cracked or loose parts.

20 mating cycles

5. Vibration

resistance

No electrical discontinuity for more than 1µs

Contactresistance : Maximum of 100mø

No damaged, cracked or loose parts.

Frequency 10 to 55Hz with half amplitude 0.75mm in 3

directions, 10 cycles each.

6. Impact

resistance

No electrical discontinuity for more than 1µs

Contact resistance : Maximum of 100mø

No damaged, cracked or loose parts.

waves in 3 directions, three times each.

7. Humidity resistance

in ordinary conditions

Contact resistance : Maximum of 100mø

Insulation resistance : Minimum of 50Mø

No damaged, cracked or loose parts.

Left for 96 hours at temperature 40ç, humidity 90 to 95%

8. Temperature

cycle

Contact resistance : Maximum of 100mø

Insulation resistance : Minimum of 50Mø

No damaged, cracked or loose parts.

Temperature : −40ç

→ +15ç to +35ç → +105ç → +15ç to +35ç

Time : 30

→ 2 to 3 → 30 → 2 to 3 min.

5 cycles in the above conditions

9. Solder heat

resistance

No deformation of components or no

significant looseness of contacts, etc.

Reflow : Recommended temperature profile

Manual soldering : 350 ±5ç for 5 sec.

Note 1 : When energizing rated current to all contacts, use 70% of rated current.

Note 2 : Includes temperature rise caused by current flow.

Note 3 : The term "storage" here refers to products stored for a long period prior to board mounting and use. The operating

temperature and humidity range covers the non-energized condition of connectors after board mounting and the

temporary storage.

■Materials / Finish

Parts

Materials

Color/Finish

Remarks

Insulating parts

LCP

Gray

UL94V-0

Black

Terminal

Phosphor bronze

Gold plating

———

Pure tin reflow plating

Metal parts

Phosphor bronze (plating material)

■Product number structure

Refer to the chart below when datermining the product specifications from the product number.

Please select from the product numbers listed in this catalog when placing orders.

FH 41 − 50S − 0.5 SH (05)

qw

e

r

t

y

SH…SMT horizontal implementation type

(05)…Gold plating (Except 50, 68 contacts)

(28)…Gold plating (50, 68 contacts)