cui.com

date 10/10/2018

│ page 7 of 8

CUI Inc

│ SERIES: AMT10 │ DESCRIPTION: MODULAR INCREMENTAL ENCODER

1. Insert Tool A as a spacer that defines the distance

to the mounting surface.

2. Slide appropriate sized Sleeve over shaft all the

way down to Tool A.

3. Slide Shaft Adaptor over Sleeve.

4. Use Tool B to press Shaft Adaptor over Sleeve until

flush with Tool A.

1. Remove Tools A and B.

2. Place Base on motor, with

Tool B used as a centering tool.

1. Fasten the Base on the motor.

2. Remove Tool B.

1. Make sure the snaps are fully engaged and

the Top Cover is flush with the Base.

2. When assembly is finished, the Shaft Adaptor should

be about flush with the front of the Encoder and the

Motor Shaft should rotate freely.

1. Slide the Top Cover onto the Base, carefully observing

that the teeth of the Shaft Adaptor align with the

grooves in the hub.*

removal of the AMT top cover base. Multiple cycles of mounting

and removing the top cover can cause base fatigue over time

and affect encoder performance.

STEP 1

STEP 4

STEP 2

STEP 5

STEP 3

STEP 6

1. Align Tool B with flange on Base.

2. Slide Base and Tool B onto motor,

centering onto the Shaft Adapter.

Align Tool B with

ASSEMBLY PROCEDURE

For more information, please visit the product page.