10

BSafety Standards Certifications (UL, C-UL, TÜV)

The PS3C, PS3CS series has received safety certifications from the UL, C-UL, and TÜV under the

conditions provided in Table 1 and Table 2.

Table 1. Conditions for UL and C-UL

100A Type Condition

200A Type Condition

Rated Voltage (AC/DC)

600V

Rated Current

100A

200A

Cable

38sq, 2 AWG (Note 1)

80sq, 2/0 AWG (Note 1)

Creepage Distance (Note 2)

MIN : 3.2mm

Clearance (Note 2)

MIN : 3.2mm

Table 2. Conditions for TÜV

100A Type Condition

200A Type Condition

Rated Voltage (AC/DC)

1000V

Rated Current

100A

200A

Cable

38sq, 2 AWG

80sq, 2/0 AWG

Overvoltage Category

III

Contamination Level

3

Creepage Distance (Note 2)

MIN : 16mm

Clearance (Note 2)

MIN : 8mm

Insulation System

Basic insulation (Panel should be grounded)

Note 1 : Use the crimp contact combination recommended below. The use of other crimp contacts can affect

clearance and creepage distance.

If you choose to use a different contact combination, be sure to check the measurements for clearance

and creepage. Make sure that these conditions will meet the UL, C-UL and TÜV.

• Recommended crimp contacts

Cable 38sq : NICHIFU R38-6

Cable 80sq : NICHIFU R80-8

Note 2 : Subjects of clearance and creepage distance are as follows.

• Between the power contacts.

• Between the signal contacts.

• Between power contact and signal contact.

• Between power contact and panel.

• Between signal contact and panel.