LMV393G-S08-R datasheet(5/11 Pages) UTC

5 / 11 page

LMV393

Preliminary

LINEAR INTEGRATED CIRCUIT

UNISONIC TECHNOLOGIES CO., LTD

5 of 11

www.unisonic.com.tw

QW-R104-004.c



APPLI CAT I ON CI RCU I T S(Cont .)

When VIN > Va the output voltage is low close to ground. It can be presented as R2 // R3 in series with R1. The

upper trip voltage Va2 is defined as

)

//R

)

//R

The total hysteresis provided by the network is defined as:

Va2

Va1

∆

To assure that the comparator will always switch correctly, the resistors values should be chosen as follow:

RPULL-UP << RLOAD and R1 > RPULL-UP.

Non-Inverting Comparator with Hysteresis

It requires a two resistor network to implement a non inverting comparator with hysteresis and with a voltage

reference at the inverting input. So when VIN is low, the output is also low. If the output will switch from low to high,

VIN must rise up to VIN1, and VIN1 can be calculated by:

REF

IN1

)

When VIN is high, the output is also high, in order to make the comparator switch back to low, VIN can be

calculated by:

REF

IN2

)

The hysteresis of this circuit is the difference between VIN1 and VIN 2.

∆

LMV393G-S08-R 数据表(PDF) 5 Page - Unisonic Technologies

LMV393G-S08-R 数据表(HTML) 5 Page - Unisonic Technologies

Html Pages

1 2 3 4 5 6 7 8 9 10 11

数据表下载