Management Interface

The management interface for this PDU model is transitioning to a new technology platform. The new

interface can be distinguished by a USB-A port (for EnviroSense2 modules) in place of the

round ENVIROSENSE port. For managing the units containing the round port, Tripp Lite recommends

using the PowerAlert Console Launcher rather than a web browser. This application enables local access

of the PDU using a self-contained, compatible Java Runtime Environment version. The Console Launcher

can be downloaded for free; click the above link or go to the Management Solutions / Utilities page. Units

with the new interface work will with most current web browsers.

3.2-3.8kW Single-Phase ATS/Switched PDU, LX

Platform Interface, 200-240V Outlets (8 C13 & 2

C19), 2 C20, 12ft Cord, 1U Rack-Mount, TAA

MODEL NUMBER: PDUMH20HVATNET

Description

Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded

network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power

sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input

cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the

secondary power source until the primary input is restored and stable. Switched PDU features include

individually controllable output receptacles and built-in network interface. Super-fast switchover between

primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any

two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant

power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a

single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system.

In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with

zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a

two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even

separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power

quality on both input sources to prevent transfer to the secondary source when unavailable or of lower

quality than the primary source. Front input LED's display primary or secondary power availability. Built-in

LX Platform network management interface card. The Java-free LX Platform HTML5-based network

interface enables full remote access for PDU status monitoring and email notifications via secure web

browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an

Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental

monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2,

SNMPv3, telnet, SSH, FTP, DHCP and NTP.

Features

200-240V 16/20A Automatic Transfer Switch (ATS) / Switched PDU (Agency de-rated to 16A

q

Highlights

Single phase 16/20A 200-240V

Auto Transfer Switch / ATS PDU

q

Enables redundant A/B power

option for non-redundant

network devices

q

Built-in LX Platform Network

Interface

q

1U horizontal rackmount; 10

outlets (8 C13 switched / 2 C19

unswitched)

q

Individually switched outlets,

network interface and 2 digit

visual current meter

q

TAA Compliant

q

Package Includes

Switch, Metered PDU with ATS

Support

q

Set of 2 C19 to C20 12 ft. / 3.7m

power cables

q

User manual with warranty

information

q

1 / 4