UCA9306

Preliminary

CMOS IC

UNISONICTECHNOLOGIESCO.,LTD

9 of 9

www.unisonic.com.tw

QW-R140-004.b



PARAMETER MEASUREMENT INFORMATION

USAGE

SWITCH

Translating up

S1

Translating down

S2

2. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz,

3. The outputs are measured one at a time, with one transition per measurement.

UTC assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other

parameters) listed in products specifications of any and all UTC products described or contained herein.

UTC products are not designed for use in life support appliances, devices or systems where malfunction

of these products can be reasonably expected to result in personal injury. Reproduction in whole or in

part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to

make changes to information published in this document, including without limitation specifications and

product descriptions, at any time and without notice. This document supersedes and replaces all

information supplied prior to the publication hereof.