STANDARD

MICROCIRCUIT DRAWING

SIZE

A

5962-99612

DLA LAND AND MARITIME

COLUMBUS, OHIO 43218-3990

REVISION LEVEL

B

SHEET

13

DSCC FORM 2234

APR 97

TABLE II. Electrical test requirements.

MIL-PRF-38534 test requirements

Subgroups

(in accordance with

MIL-PRF-38534, group A

test table)

Interim electrical parameters

1

Final electrical parameters

1*, 2, 3, 4**, 5**, 6**

Group A test requirements

1, 2, 3

Group C end-point electrical 1/

parameters

1,2,3

End-point electrical parameters

for Radiation Hardness Assurance

(RHA) devices

Not applicable

1/

As a minimum, for all Group C testing performed after (11-05-20)

manufacturers shall perform subgroups 1, 2, and 3 from the Group A

electrical test table (Table C-Xa of MIL-PRF-38534).

*

PDA applies to subgroup 1.

**

Subgroups 4, 5, and 6, if not tested shall be guaranteed to the limits

specified in table I.

4.3.5 Radiation Hardness Assurance (RHA) inspection. RHA inspection is not currently applicable to this drawing.

5. PACKAGING

5.1 Packaging requirements. The requirements for packaging shall be in accordance with MIL-PRF-38534.

6. NOTES

6.1 Intended use. Microcircuits conforming to this drawing are intended for use for Government microcircuit applications

(original equipment), design applications, and logistics purposes.

6.2 Replaceability. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-

prepared specification or drawing.

6.3 Configuration control of SMD's. All proposed changes to existing SMD's will be coordinated as specified in MIL-PRF-

38534.

6.4 Record of users. Military and industrial users shall inform DLA Land and Maritime when a system application requires

configuration control and the applicable SMD. DLA Land and Maritime will maintain a record of users and this list will be used

for coordination and distribution of changes to the drawings. Users of drawings covering microelectronic devices (FSC 5962)

should contact DLA Land and Maritime - VA, telephone (614) 692-0544.

6.5 Comments. Comments on this drawing should be directed to DLA Land and Maritime -VA, Columbus, Ohio 43218-3990,

or telephone (614) 692-1081.

6.6 Sources of supply. Sources of supply are listed in MIL-HDBK-103 and QML-38534. The vendors listed in MIL-HDBK-103

and QML-38534 have submitted a certificate of compliance (see 3.7 herein) to DLA Land and Maritime - VA and have agreed to

this drawing.