Product Specification

9 / 31

LM185WH2

Liquid Crystal Display

Ver. 1.0

JUN., 21, 2010

FIG. 4 Connector diagram

Notes:

1. NC: No Connection.

2. All GND(ground) pins should be connected together and to Vss which should also

be connected to the LCD’s metal frame.

3. All V

4. Input Level of LVDS signal is based on the IEA 664 Standard.

5. PWM_OUT is a reference signal for inverter control.

This PWM signal is synchronized with vertical frequency.

Its frequency is 3 times of vertical frequency, and its duty ratio is 50%.

If the system don’t use this pin, do not connect.

Rear view of LCM

#1

#30

signal pairs

Power(5V)

PWM signal

GT103-30S-HF15-E2500 (LSC)

#1

#30

PDF created with pdfFactory Pro trial version www.pdffactory.com