STM32F030C8 datasheet(12/93 Pages) STMICROELECTRONICS

12 / 93 page

Functional overview

STM32F030x4/x6/x8/xC

12/93

DS9773 Rev 4

Functional overview

3.1

Arm® Cortex®-M0 core with embedded Flash and SRAM

The Arm® Cortex®-M0 processor is the latest generation of Arm processors for embedded

systems. It has been developed to provide a low-cost platform that meets the needs of MCU

implementation, with a reduced pin count and low-power consumption, while delivering

outstanding computational performance and an advanced system response to interrupts.

The Arm® Cortex®-M0 32-bit RISC processor features exceptional code-efficiency,

delivering the high-performance expected from an Arm core in the memory size usually

associated with 8- and 16-bit devices.

The STM32F0xx family has an embedded Arm core and is therefore compatible with all Arm

tools and software.

Figure 3 shows the general block diagram of the device family.

3.2

Memories

The device has the following features:

•

4 to 32 Kbytes of embedded SRAM accessed (read/write) at CPU clock speed with 0

wait states and featuring embedded parity checking with exception generation for fail-

critical applications.

•

The non-volatile memory is divided into two arrays:

–

16 to 256 Kbytes of embedded Flash memory for programs and data

–

Option bytes

The option bytes are used to write-protect the memory (with 4 KB granularity) and/or

readout-protect the whole memory with the following options:

–

Level 0: no readout protection

–

Level 1: memory readout protection, the Flash memory cannot be read from or

written to if either debug features are connected or boot in RAM is selected

–

Level 2: chip readout protection, debug features (Cortex®-M0 serial wire) and boot

in RAM selection disabled

3.3

Boot modes

At startup, the boot pin and boot selector option bit are used to select one of the three boot

options:

•

Boot from User Flash

•

Boot from System Memory

•

Boot from embedded SRAM

The boot loader is located in System Memory. It is used to reprogram the Flash memory by

using USART on pins PA14/PA15 or PA9/PA10.

STM32F030C8 数据表(PDF) 12 Page - STMicroelectronics

STM32F030C8 数据表(HTML) 12 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93

数据表下载