3

TP2011/TP2012/TP2014

Ultra-Low Power 200nA, 1.6V, RRIO, Push-Pull Output Comparators

www.3peakic.com.cn

REV1.2

Output Current: OUT.................................... ±25mA

Operating Temperature Range.......–40°C to 85°C

Maximum Junction Temperature................... 150°C

Storage Temperature Range.......... –65°C to 150°C

Lead Temperature (Soldering, 10 sec) ......... 260°C

Note 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to any

Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime.

Note 2: The inputs are protected by ESD protection diodes to each power supply. If the input extends more than 500mV beyond the power

supply, the input current should be limited to less than 10mA.

Note 3: A heat sink may be required to keep the junction temperature below the absolute maximum. This depends on the power supply

voltage and how many amplifiers are shorted. Thermal resistance varies with the amount of PC board metal connected to the package. The

specified values are for short traces connected to the leads.

ESD, Electrostatic Discharge Protection

Symbol

Parameter

Condition

Minimum Level

Unit

HBM

Human Body Model ESD

ANSI/ESDA/JEDEC JS-001

2

kV

CDM

Charged Device Model ESD

ANSI/ESDA/JEDEC JS-002

1

kV

Thermal Information

Package

Unit

8-Pin SOP

112.4

64.1

°C/W

14-Pin SOP

96.7

46.7

°C/W

14-Pin TSSOP

108.1

42.7

°C/W