Fully Automatic Dicing Saw

DFD6341

DFD6341 Operation flow

[1]

Lower arm moves workpiece from the cassette to the pre-alignment

[2]

Upper arm moves the workpiece to the spinner table

[3]

Lower arm returns the workpiece to the cassette

Specifications

2016.1

Environmental Conditions

• Use clean, oil-free air (dew point between -10 - -20 , residual oil: 0.1 ppm, and filtration rating: 0.01μm/99.5 % or more).

• Keep room temperature fluctuations within ±1℃ of the set value. (Set value should be between 20 - 25 ℃).

• Keep cutting water and cleaning water 2 ℃ above room temperature (fluctuations within ±1 ℃).

• The machines should be used in an environment, free from external vibration. Do not install machine near a ventilation opening, heat generation equipment or oil mist generating parts.

• This machine uses water. In case of water leakage, please install the machine on the floor with sufficient waterproofing and drainage treatments.

* All pressures specified above are gauge pressures.

* As the above specification may change due to technical modifications.

Please confirm when placing your order.

* For further information, please contact your local sales representative.

Unit

1.2, 1.8 kW ,Highspeed rotation

2.2 kW

-

Cutting range

mm

Cutting speed

mm/sec

Cutting range

mm

Index step

mm

Index positioning

accuracy

mm

Max. stroke

mm

19.22

(For φ2″blade)

19.9

(For φ3″blade)

Moving resolution

mm

Repeatability

accuracy

mm

θ-axis

Max. rotating

angle

deg

Rated torque

N・m

0.19(1.2kW/High speed rotation)

0.286(1.8 kW)

0.7

Revolution speed

range

min

-1

6,000 - 60,000

(1.2 kW/1.8 kW)

20,000-80,000

(High speed rotation

3,000 - 30,000

mm

kg

Machine weight

Y1･Y2

-axis

Machine

dimensions (W×D×H)

Spindle

Approx.1,500

0.002/210

(Single error)0.002/5

Specification

φ

8″

X-axis

210

0.1 - 1,000

Workpiece size

1,180 × 1,080 × 1,820

Z-axis

380

0.001

0.00005

210

0.0001

www.disco.co.jp