www.disco.co.jp

Easy operation

The GUI (Graphical User Interface) implemented on the

DFD6362, which has been recognized for its ease of use,

has been included on the DFD6760. This is combined with

an LCD touch panel for stress-free operation.

Fully Automatic Dicing Saw

DFD6760

2014.11

Specifications

Meeting the need for traceability

Since the DFD6760 is equipped with two chuck tables, while

dicing is performed on one chuck table, kerf images of the

workpiece after processing can be saved and processing

quality can be recorded using the other chuck table. In

recent years at production facilities, there has been a

demand for traceability. If a defect is found in a device, the

DFD6760 can provide the records to check or certify product

quality.

Dicer image viewer and software for

browsing processing records

Display the kerf image by double-clicking

Resize the image by changing the magnification setting

Click!

Environmental Conditions

• Use clean, oil-free air (dew point between -10 - -20 , residual oil: 0.1 ppm, and filtration rating:

0.01μm/99.5 % or more).

• Keep room temperature fluctuations within ±1℃ of the set value. (Set value should be between

20 - 25 ℃).

• Keep cutting water and cleaning water 2 ℃ above room temperature (fluctuations within ±1 ℃).

• The machines should be used in an environment, free from external vibration. Do not install

machine near a ventilation opening, heat generation equipment or oil mist generating parts.

• This machine uses water. In case of water leakage, please install the machine on the floor with

sufficient waterproofing and drainage treatments.

* All pressures specified above are gauge pressures.

* As the above specification may change due to technical modifications.

Please confirm when placing your order.

* For further information, please contact your local sales representative.

Unit

1.2, 1.8 kW

2.2 kW

mm

Cutting rangemm

Cutting speed

mm/sec

Cutting rangemm

Index step

mm

Index positioning

accuracy

mm

Index step

mm

Index positioning

accuracy

mm

Max. stroke

mm

14.7

(For φ2″blade)

14.9

(For φ3″blade)

Moving resolution

mm

Repeatability

accuracy

mm

θ-axis

Max. rotating

angle

deg

Rated torque

N・m

0.19(1.2

kW/High speed

rotation)

0.7

Revolution speed

range

min

-1

6,000 - 60,000

3,000 - 30,000

mm

kg

Approx.2,800

Machine weight

MY1･

MY2

-axis

Spindle

1,200 × 1,900 × 1,800

0.00005

0.001

380

Z-axis

Y1･Y2

-axis

Machine

dimensions(W×D×H)

310

Specification

φ

300

X-axis

310

0.1 - 1,000

Workpiece size

0.0001

0.003/310

(Single error)0.002/5

0.0001

0.003/310

(Single error)0.002/5