Data sheet

BMP183

Page 14

BST-BMP183-DS000-00 | Revision 1.0 | June 2012

Bosch Sensortec

© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third

parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.

Note: Specifications within this document are subject to change without notice.

3.6 Calculating pressure and temperature

The mode (ultra low power, standard, high, ultra high resolution) can be selected by the variable

oversampling_setting (0, 1, 2, 3) in the C code.

Calculation of true temperature and pressure in steps of 1Pa (= 0.01hPa = 0.01mbar) and

temperature in steps of 0.1°C.

The following figure shows the detailed algorithm for pressure and temperature measurement.

Sensortec and via its sales and distribution partners. Please contact your Bosch Sensortec

representative for details.