2

Technical Data 10390

Effective September 2017

FPV1006

High current power inductors

www.eaton.com/electronics

Product Specifications

(nH) ±10%

(A)

(A)

DCR (mΩ)

@ +20 °C

maximum

FPV1006-85-R

85

25

81

0.41

FPV1006-125-R

125

25

57

0.41

FPV1006-150-R

150

25

45

0.41

1. Open Circuit Inductance (OCL) Test Parameters: 100 kHz, 0.1 Vrms, 0.0 Adc, +25 °C

PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the

temperature rise. It is recommended that the temperature of the part not exceed +125 °C under worst case operating

conditions verified in the end application.

4. Part Number Definition: FPV1006-xxx-R

FPV1006 = Product code and size

xxx=Inductance value in nH,

-R suffix = RoHS compliant

Note: Hipot: 250 Vdc minimum for 2 seconds, conductor to core

Dimensions (mm)

Part marking: FPV1006–xxx, xxx=inductance value in nH,

wwllyy= date code, R=revision level

Tolerances are ±0.25 unless stated otherwise

Soldering surfaces to be coplanar within 0.102 millimeters

DCR measured from point “a” to point “b”

Do not route traces or vias underneath the inductor.

Packaging information (mm)

Supplied in tape and reel packaging, 620 parts per 13” diameter reel

Recommended Pad Layout

Schematic

Direction of feed