数据搜索系统，热门电子元器件搜索
  Chinese  ▼
ALLDATASHEETCN.COM

X  

预览 PDF HTML

GD25LE32DWJG 数据表(PDF) 53 Page - GigaDevice Semiconductor (Beijing) Inc.

部件名 GD25LE32DWJG
功能描述  1.8V Uniform Sector Dual and Quad Serial Flash
PDF  72 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
制造商  GIGADEVICE [GigaDevice Semiconductor (Beijing) Inc.]
网页  http://www.gigadevice.com/
标志 GIGADEVICE - GigaDevice Semiconductor (Beijing) Inc.

GD25LE32DWJG 数据表(HTML) 53 Page - GigaDevice Semiconductor (Beijing) Inc.

Back Button GD25LE32DWJG Datasheet HTML 49Page - GigaDevice Semiconductor (Beijing) Inc. GD25LE32DWJG Datasheet HTML 50Page - GigaDevice Semiconductor (Beijing) Inc. GD25LE32DWJG Datasheet HTML 51Page - GigaDevice Semiconductor (Beijing) Inc. GD25LE32DWJG Datasheet HTML 52Page - GigaDevice Semiconductor (Beijing) Inc. GD25LE32DWJG Datasheet HTML 53Page - GigaDevice Semiconductor (Beijing) Inc. GD25LE32DWJG Datasheet HTML 54Page - GigaDevice Semiconductor (Beijing) Inc. GD25LE32DWJG Datasheet HTML 55Page - GigaDevice Semiconductor (Beijing) Inc. GD25LE32DWJG Datasheet HTML 56Page - GigaDevice Semiconductor (Beijing) Inc. GD25LE32DWJG Datasheet HTML 57Page - GigaDevice Semiconductor (Beijing) Inc. Next Button
Zoom Inzoom in Zoom Outzoom out
 53 / 72 page
background image
1.8V Uniform Sector
Dual and Quad Serial Flash
GD25LE32D
53
7.37 Enable Reset (66H) and Reset (99H)
If the Reset command is accepted, any on-going internal operation will be terminated and the device will return to its
default power-on state and lose all the current volatile settings, such as Volatile Status Register bits, Write Enable Latch
status (WEL), Program/Erase Suspend status, Read Parameter setting (P7-P0), Deep Power Down Mode, Continuous
Read Mode bit setting (M7-M0) and Wrap Bit Setting (W6-W4).
The “Enable Reset (66H)” and the “Reset (99H)” commands can be issued in either SPI or QPI mode. The “Reset
(99H)
” command sequence as follow: CS# goes low  Sending Enable Reset command  CS# goes high  CS# goes
low  Sending Reset command  CS# goes high. Once the Reset command is accepted by the device, the device will
take approximately tRST =30us / tRST_E =12ms to reset. During this period, no command will be accepted. Data corruption
may happen if there is an on-going or suspended internal Erase or Program operation when Reset command sequence is
accepted by the device. It is recommended to check the WIP bit and the SUS bit in Status Register before issuing the
Reset command sequence.
Figure38. Enable Reset and Reset command Sequence Diagram
Command
0
1
2
3
4
5
6
7
66H
CS#
SCLK
SI
SO
High-Z
Command
0
1
2
3
4
5
6
7
99H
Figure38a. Enable Reset and Reset command Sequence Diagram (QPI)
CS#
SCLK
IO0
IO1
IO2
IO3
0
1
Command
66H
0
1
Command
99H



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72


数据表 下载

Go To PDF Page


链接网址



ALLDATASHEET是否为您带来帮助?  [ DONATE ] 

关于 Alldatasheet   |   广告服务   |   联系我们   |   隐私政策   |   数据表链接    |   链接交换   |   制造商名单
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com