SPEC NO: DSAJ9003

REV NO: V.4B

DATE: OCT/18/2016

PAGE: 2 OF 6

APPROVED: Wynec

CHECKED: Allen Liu

DRAWN: L.T.Zhang

ERP: 1203010233

Selection Guide

Part No.

Emitting Color (Material)

Lens Type

Viewing

Angle [1]

Min.

Typ.

2θ1/2

APHCM2012QWF/D

White (InGaN)

Yellow Fluorescent

120

250

160

°

Iv (mcd) [2]

@ 20mA

Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C

Parameter

Values

Units

Power dissipation

120

mW

DC Forward Current

30

mA

Peak Forward Current [1]

150

mA

Reverse Voltage

5

V

Operating Temperature

-40°C To +85°C

Storage Temperature

-40°C To +85°C

Electrostatic Discharge Threshold (HBM)

250

V

Symbol

Parameter

Emitting Color

Typ.

Max.

Units

Test Conditions

Forward Voltage

White

3.3

4

V

Reverse Current

White

50

uA

X [2]

Chromaticity Coordinates

0.31

Y [2]

0.31

C

Capacitance

White

100

pF

White

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity / luminous Flux: +/-15%.

3. Luminous intensity value is traceable to CIE127-2007 standards.

Notes:

1. Forward Voltage: +/-0.1V.

2. Measurement tolerance of the chromaticity coordinates is ±0.01.

3. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or

premature failure.

Notes:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static

electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.