Page 1 / 4

© 2017 Kingbright. All Rights Reserved. Spec No: DSAN8393 / 1203014460 Rev No: V.4A Date: 07/01/2017

DESCRIPTIONS

The Hyper Red device is based on light emitting diode

chip made from AlGaInP

Electrostatic discharge and power surge could

damage the LEDs

It is recommended to use a wrist band or

anti-electrostatic glove when handling the LEDs

All devices, equipments and machineries must be

electrically grounded

FEATURES

2.0 mm x 1.25 mm SMD LED, 0.75mm thickness

Low power consumption

Wide viewing angle

Ideal for backlight and indicator

Package: 2000 pcs / reel

Moisture sensitivity level: 3

RoHS compliant

APPLICATIONS

Backlight

Status indicator

Home and smart appliances

Wearable and portable devices

Healthcare applications

ATTENTION

Observe precautions for handling

electrostatic discharge sensitive devices

PACKAGE DIMENSIONS

APT2012LSECK/J3-PRV

2.0 x 1.25 mm SMD Chip LED Lamp

RECOMMENDED SOLDERING PATTERN

(units : mm; tolerance : ± 0.1)

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1(0.004") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to

change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

Part Number

Emitting Color

(Material)

Lens Type

Min.

Typ.

2θ1/2

APT2012LSECK/J3-PRV

Water Clear

50

100

*20

*40

140

°

SELECTION GUIDE

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity / luminous flux: +/-15%.

* Luminous intensity value is traceable to CIE127-2007 standards.

香港至恩科技有限公司　　

ｗｗｗ．ｔｏ－ｇｒａｃｅ．ｃｏｍ

公司授权代理销售ＬＩＴＥ－ＯＮ：光耦，贴片ＬＥＤ灯等

进口原装，现货供应，价格优势，技术支持

电话：０７５５－８３４６４９４８　传真：０７５５－８３４６４０７６