Type XHHW-2 or RHH/RHW-2/USE-2

GenFree

3

Specifications 5075, 5125 & 5275

GenFree II LSZH XLPO Low-Voltage Power

Single and Dual Layer Cross-linked Polyolefin Single Conductor

Rated for 600 Volts or 2000 Volts (AC or DC)

For Use in all Closed Environments, Commercial / Utility / Industrial Applications, Free Air or Direct Burial

III.

CONDUCTOR

5075 & 5275 Conductors shall be of compressed tinned copper per ASTM B33 and shall conform

to requirements as listed in ASTM B8 for Class B standing.

5125

Conductors shall be of stranded annealed bare copper per ASTM B3 and shall

conform to requirements as listed in ASTM B8 for Class B stranding.

IV.

SEPARATOR

A suitable separator may be used if deemed necessary by the manufacturer.

V.

INSULATION

5075

The insulation shall be Composite, Low-Smoke, Zero-Halogen, Cross-linked

Polyolefin (LSZH XLPO) colored for contrast with black Low-Smoke, Zero-Halogen,

Cross linked Polyolefin (LSZH XLPO) in accordance with the requirements of UL 44

Type RHH/RHW-2 and UL 854 Type USE-2.

5125

The insulation shall be Low-Smoke, Zero-Halogen, Flame-Retardant Cross-linked

Polyolefin (LSZH XLPO) in accordance with the requirements of UL 44 Type XHHW-

2, black. Colors available upon request.

5275

The insulation shall be Low-Smoke, Zero-Halogen, Cross-linked Polyolefin (LSZH

XLPO) in accordance with the requirements of UL 44 Type RHH/RHW-2 and UL 854

Type USE-2.

All three product lines share both the common critical characteristics and listings, but in a fully

functional LSZH product:

• Type XHHW-2 ― Spec 5125

• Single layer tri-rated Type RHH/RHW-2/USE-2 ― Spec 5275

• Dual layer tri-rated Type RHH/RHW-2/USE-2 ― Spec 5075

GenFree II products meet or exceed the following industry standards and testing criteria:

A. Physical Properties:

Passes the current overload crush test as required per UL 854 for approval as USE-2,

allowing for approval for use in underground service entrance applications as approved by

the NEC.