-

Pasternack does not make

any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Pasternack does not assume any liability arising out of the use of any part or documentation.

4

Connector Characteristics

Description

Connector 1

Connector 2

Type

SMA Male

SMA Male Right Angle

Specification

MIL-STD-348

MIL-STD-348

Impedance

50 Ohms

50 Ohms

Contact Material and Plating

Beryllium Copper, Gold over Nickel

Beryllium Copper, Gold over Nickel

Contact Plating Specification

50 µin minimum

50 µin minimum

Dielectric Type

PTFE

PTFE

Body Material and Plating

Passivated Stainless Steel

Passivated Stainless Steel

Body Plating Specification

SAE-AMS-2700

SAE-AMS-2700

Coupling Nut Material and Plating

Passivated Stainless Steel

Passivated Stainless Steel

Coupling Nut Plating Specification

SAE-AMS-2700

SAE-AMS-2700

Hex Size

5/16 inch

5/16 inch

Seal Gasket Material

Silicone Rubber

Silicone Rubber

Contact Gage Specification

0.000 in min

0.000 in min

Insulator Gage Specification

0.000 in min

0.000 inmin

.

Mechanical Specification Notes:

Environmental Specifications

Description

Specification

Temperature Operating Range

-55 to +125 deg C

.

Process Specifications

Process

Specification

Cable Preconditioning

5 cycles, -55 °C to +125°C, 20 minute dwells

Soldering

in accordance with J-STD-001, class 3

Marking

shall meet the adherence requirements of SAEAS5942

Workmanship

shall be in accordance with IPC/WHMA-A-620, class 3

.

PE3M0128 REV 1.2

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,

inventory and certifications: Temperature Conditioned SMA Male to SMA Male Right Angle Low Loss Cable Using PE-

P142LL Coax PE3M0128

RF Cable Assemblies Technical Data Sheet

Temperature Conditioned SMA Male to SMA Male

Right Angle Low Loss Cable Using PE-P142LL Coax

PE3M0128