-

Pasternack does not make

any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Pasternack does not assume any liability arising out of the use of any part or documentation.

3

Mechanical Specifications

Cable Assembly

Description

Minimum

Typical

Maximum

Units

Cable Outer Diameter

0.155

0.16

0.165

in

Weight

0.26 [117.93]

lbs [g]

.

Cable Characteristics

Description

Specification

Cable Type

PE-P160LL

Impedance

50 Ohms

Inner Conductor Type

Solid

Inner Conductor Material and Plating

Copper, Silver

Dielectric Type

Expanded PTFE Tape

Number of Shields

3

Shield Layer 1

Silver Plated Copper

Shield Layer 2

Aluminum Polyester

Shield Layer 3

Silver Plated Copper Wire

Jacket Material

FEP

.

Connector Characteristics

Description

Connector 1

Connector 2

Type

N Female Bulkhead

N Female Bulkhead

Specification

MIL-STD-348

MIL-STD-348

Impedance

50 Ohms

50 Ohms

Contact Material and Plating

Beryllium Copper, Gold over Nickel

Beryllium Copper, Gold over Nickel

Contact Plating Specification

50 µin minimum

50 µin minimum

Dielectric Type

PTFE

PTFE

Outer Conductor Material and Plating

Passivated Stainless Steel

Passivated Stainless Steel

Outer Conductor Plating Specification

SAE-AMS-2700

SAE-AMS-2700

Body Material and Plating

Passivated Stainless Steel

Passivated Stainless Steel

Body Plating Specification

SAE-AMS-2700

SAE-AMS-2700

Contact Gage Specification

0.187 to 0.207 in

0.187 to 0.207 in

.

Mechanical Specification Notes:

PE3M0222 REV 1.2

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,

inventory and certifications: Temperature Conditioned N Female Bulkhead to N Female Bulkhead Low Loss Cable Using

PE-P160LL Coax PE3M0222

RF Cable Assemblies Technical Data Sheet

Temperature Conditioned N Female Bulkhead to N Female

Bulkhead Low Loss Cable Using PE-P160LL Coax

PE3M0222