TECHNICAL DATA SHEET

产品数据表

<FOR COB MODULE>

12 / 12

PREPARED BY：Lisa.y

TE-R8

SERIES

A/3

Revision issued in 2014.

7-5-4．Make sure no external force acts on its optical surface, when soldering.

焊接时，不能有外力作用于光学表面；

7-5-5．Please choose lead-free soldering.

请使用无铅焊接；

7-5-6．Before repairing soldered part, please cool the product until normal temperature.

焊接修理时，应将产品自然冷确到常温后操作；

7-5-7．The product whose soldering rate exceeds suggested rate may confront quality problems.

We do not guarantee its quality.

如果焊接率超过这些建议的条件，产品品质不予保证；

7-6

．Using Condition 使用环境

7-6-1．Please make sure the product is not applied under the following conditions；

请确保产品未在下列条件下使用；

In case the product has to be used under the following conditions, please make an evaluation in advance.

如果该产品需在下列条件下使用，请先进行评估；

7-6-2．Directly or indirectly by the rain wet places；

直接或间接地被雨水淋湿的地方；

7-6-3．Be exposed to corrosive gases (such as Cl2, H2S, NH3, SOx, NOx, etc.)；

暴露在腐蚀性气体（如 Cl2, H2S, NH3, SOx, NOx 等）的地方；

7-6-4．Be stained with dust, liquid or oil；

沾上灰尘，液体或油的地方；