www.cherryswitches.com

Page 1 of 2, last update 2015-01-12, Specifications subject to change without notice.

Magnetic Proximity Sensors (Hall Effect)

MP1005 - MP1007 Sensors

Solid state magnetic proximity sensor

with electrical immunity protection

Description

The MP1 Series sensors are one-piece non-contact solid-state position sensors. The sensors operate through the use of Hall

Effect technology with magnetic fields generated by permanent magnets. They provide a sinking current output.

Features

Typical Applications



Solid state reliability



Stable output over operating temperature range



Compatible with unregulated power supply



South pole activated



Open collector (sinking or NPN) output can be used with bipolar or

CMOS logic circuits with suitable pull-up resistor



RoHS compliant



IP67



Door position & interlock



Limit switch



Flow/speed



Home security



Pedal switch

Environmental Specifications

Operating Temperature (MP100502)

-40 °C to 85

⁰C (-40 ⁰F to 185 ⁰F)

Operating Temperature (MP100701)

-40 °C to 150

⁰C (-40 ⁰F to 302 ⁰F)

Storage Temperature (MP100502)

-40 °C to 85

⁰C (-40 ⁰F to 185 ⁰F)

Storage Temperature (MP100701)

-40 °C to 150

⁰C (-40 ⁰F to 302 ⁰F)

Ingress Protection

IP67

Electrical Specifications

Operating Supply Voltage

5 to 24 VDC

Supply Current

4.1 mA typ., 7.5 mA max.

Output Current (Sink)

25 mA max.

Output Off Voltage

30 VDC

Maximum Input Voltage

30 VDC

Maximum Reverse Voltage

30 VDC

Pull-up Resistor

See chart

Mechanical Specifications

Housing Material

Aluminium

Maximum Installation Torque Limit

50 in lbs on threads

Note: An external pull-up resistor is required, the value of which is dependent on the supply voltage. The resistor should be

connected between the output and Vcc. Refer to the wiring diagram for lead colors or pin numbering as applicable.

Products

Part Number

Housing Color

Termination

MP100502

Red

20 AWG x 1 m

MP100701

Black

20 AWG x 1 m