www.cherryswitches.com

Page 1 of 2, last update 2014-10-29, Specifications subject to change without notice.

Magnetic Proximity Sensors (Hall Effect)

MP1014 Sensors

Digital Hall-effect position sensor

in low-profile flange-mount housing

Description

The MP1 Series sensors are one-piece non-contact solid-state position sensors. The sensors operate through the use of Hall

Effect technology with magnetic fields generated by permanent magnets. They provide a sinking current output.

Features

Typical Applications



Solid state reliability



South pole sensitive



Unipolar device



RoHS compliant



Low profile design



IP65



Door position & interlock



Limit switch



Flow/speed



Home security



Pedal switch

Environmental Specifications

Operating Temperature

-40 °C to 85

⁰C (-40 ⁰F to 185 ⁰F)

StorageTemperature

-40 °C to 100

⁰C (-40 ⁰F to 212 ⁰F)

Ingress Protection

IP65

Electrical Specifications

Operating Supply Voltage (MP101401)

4.5 to 18 VDC

Operating Supply Voltage (MP101402)

4.5 to 24 VDC

Supply Current

3.0 mA typ., 5.2 mA max.

Output Current (Sink)

20 mA max.

Maximum Reverse Voltage (MP101401)

18 VDC

Maximum Reverse Voltage (MP101402)

15 VDC

Pull-Up Resistor

See chart

Mechanical Specifications

Housing Material

Glass-reinforced nylon plastic

*Not commonly stocked

Note: An external pull-up resistor is required, the value of which is dependent on the supply voltage. The resistor should be

connected between the output and Vcc. Refer to the wiring diagram for lead colors or pin numbering as applicable.

Recommended External Pull-Up Resistor

Volts DC

5

9

12

15

24

Ohms

1k

1.8k

2.4k

3k

3k

Products

Part Number

Leads

MP101401

24 AWG x 314 mm

MP101402*

24 AWG x 314 mm