CFA633-RDI-KU datasheet(13/86 Pages) CRYSTAIFONTZ

13 / 86 page

Crystalfontz America, Inc.

Data Sheet Release Date 2012/02/21

www.crystalfontz.com

CFA633-RDI-KU LCD Module (Hardware v2.0 / Firmware u2v1)

February 2012

Page 13

Buy Cables Separately

Cable lengths are approximate. Common configurations are described in the section CONNECTION

INFORMATION (Pg. 25). Additional cables are available on our website.

Crystalfontz

Cable

Description

All cables are RoHS compliant

WR-PWR-Y12

~13 inches

Cable allows you to plug a 4-pin “hard drive style” Molex power connector into the module's “floppy drive

style” power connector, plus provides an additional female 4-pin Molex connector.

WR-USB-Y03

~6.5 feet

The cable has two different types of USB connectors, one smaller than the other. Connect the cable’s

smaller 2mm female USB connector to the module’s USB connector. Connect the cable’s larger USB-A

female connector to host’s USB-A connector.

WR-USB-Y27

~6 feet

The cable has two different types of USB connectors, one smaller than the other. Connect cable’s smaller

micro-B USB female connector to module’s micro-B USB connector. Connect cable’s larger USB-A female

connector to host’s USB-A connector.

WR-USB-Y34

~27 inches

Connect cable’s micro-B USB female connector to module’s micro-B USB connector. Connect cable’s sin-

gle piece 4-pin 0.1" female connector to USB pins on host’s motherboard. For correct orientation, note the

+5v location on the 4-pin connector.

WR-PWR-Y14

~24 inches

Use this ATX power cable to turn an ATX power supply on and off, or power cycle the host through the

module. Requires optional 7-in female connector at J8 on module. Select J8 connector after you click on

the module’s website page button “Customize and Add to Cart”. Connect the cable’s male 7-pin connector

to the module’s J8 female connector.

WR-FAN-X01

~16 inches

Connect up to four cables to connect up to four fans. Connect cable’s 3-pin male connector to module’s

connectors labeled FAN1, FAN2, FAN3, or FAN4. Connect cable’s 3-pin female connector to a fan’s con-

nector. (Fans are not sold by Crystalfontz.)

WR-DOW-Y17

~12 inches + ~12

inches between

connectors

Connect (“daisy chain”) up to 32 of these DOW (Dallas One-Wire) DS18B20 temperature sensor cables.

Requires optional DOW connector at J_DOW on module. Select DOW connector after you click on the

module’s website page button “Customize and Add to Cart”.

CFA633-RDI-KU 数据表(PDF) 13 Page - Crystalfontz America, Inc.

CFA633-RDI-KU 数据表(HTML) 13 Page - Crystalfontz America, Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86

数据表下载