4-pin Micro-style QD Emitters

All Other Micro-style QD Models

20-250 V ac

No Connection

rd/wh

rd/bk

rd

gn

20-250 V ac

No Connection

Load

rd/wh

rd

rd/bk

gn

Dimensions

Cabled Models

QD Models

51.5 mm

(2.03")

ø 40.0 mm

(1.57")

Jam Nut

(Supplied)

11.5 mm

(0.45")

M18 x 1

Thread

ø 15 mm

(0.59")

30.0 mm

(1.18")

Green LED

Power Indicator

Yellow LED

Output Indicator

66.5 mm

(2.62")

ø 40.0 mm

(1.57")

Single-turn

Sensitivity (Gain) Control

(D and L Models)

Specifications

Supply Voltage and Current

20 to 250 V ac (50/60 Hz)

Average current: 20 mA

Peak current: 200 mA at 20 V ac, 500 mA at 120 V ac, 750 mA at 250 V ac

Supply Protection Circuitry

Protected against reverse polarity and transient voltages

Output Configuration

SPST solid-state ac switch; Three-wire connections; Choose light operate or

dark operate models

Light Operate: Output conducts when sensor sees its own (or the emitter’s)

modulated light

Dark Operate: Output conducts when the sensor sees dark

Output Rating

300 mA maximum (continuous)

Fixed-field models: derate 5 mA/°C above +50 °C (+122 °F)

Inrush Capability 1 amp for 20 milliseconds, non-repetitive

OFF-state leakage current: < 100 microamps

ON-state saturation voltage: 3 V at 300 mA ac; 2 V at 15 mA ac

Output Protection Circuitry

Protected against false pulse on power-up

Output Response Time

Opposed mode models: 16 ms ON, 8 ms OFF

Other models: 16 ms ON and OFF

NOTE: 100 ms delay on power-up

Repeatability

Opposed mode models: 2 ms

Other models: 4 ms

Repeatability and response are independent of signal strength.

Adjustments

Non-polarized retroreflective and diffuse models (only) have a single-turn rear-

panel sensitivity control (turn clockwise to increase gain)

Indicators

Two LEDs (green and amber)

Green on: power to sensor is on

Amber on: sensor sees light

Amber flashing: excess gain marginal (1 to 1.5×) in light condition

Construction

Housing: PBT polyester housing

Lens: polycarbonate (opposed-mode) or acrylic (other models)

Connections

2 m (6.5 ft) integral cable; 9 m (30 ft) integral cable; or 4-pin Micro-style quick-

disconnect fitting

T18 Series Sensors (AC Voltage)

2

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 116164 Rev. C