Approval Sheet

Page 2 of 10

ASC_WFxxT&U_Q

Mar - 2018

FEATURE

1.

SMD metal film resistor

2.

High reliability and stability of 0.3% and below per customer request

3.

High performance of TCR: 50&25 ppm/

4.

Low current noise

5.

RoHS compliant and lead free

6.

AEC-Q200 compliant

APPLICATION

•

Automotive

•

Medical equipment

•

Measuring instrument

•

Communication devices

•

Electronic devices

DESCRIPTION

The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are

added at each end and connected by a resistive layer that is applied to the top surface of the substrate. The

composition of the resistive layer is adjusted to give the approximate resistance required and the value is

trimmed to nominated value within tolerance which controlled by laser trimming of this resistive layer.

The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For

environmental soldering issue, the outer layer of these end terminations is a Lead-free solder .

Fig 1. Construction of Chip-R WFxx_Q