Light-Operate/Dark-Operate Select

Push Button (0.04 seconds ≤ “Click” ≤ 0.8

seconds)

Remote Line (0.04 seconds ≤ T ≤ 0.8 seconds)

Results

From Run mode, seven-click the push

button.

From Run mode, seven-pulse remote line.

T

T

T

T

T

T

T

T

T

T

T

T

T

Sensor toggles between Light-/Dark-Operate settings

and returns to Run mode.

Power LED: Flashes 3x, then ON Green

Output LED: Light Operate – ON, 3

Dark Operate – OFF, 3

Then ON or OFF, depending on output state

Static TEACH

Darkest

(no signal)

Most Light

(saturated

signal)

Output OFF

Output ON

2nd Taught

Condition

1st Taught

Condition

Sensor positions

threshold between

presented conditions

Figure 3. Static TEACH (Light Operate shown)

• Static TEACH locates a single switching threshold (switchpoint) at

the optimal location between the two taught conditions, with the

Output ON condition on one side, and the Output OFF condition

on the other.

• During Static TEACH, the first condition taught is the ON

condition. Output ON and OFF conditions may be reversed by

switching the TEACH order or by changing the Light-/Dark-

Operate setting in setup mode (see Sensor Setup on page 3).

• Static TEACH is recommended for applications where two

conditions can be presented individually.

1. Access the Static TEACH Mode.

Method

Action

Result

Push Button

Press and hold the push button 2 to 4 seconds.

The sensor waits for the first sensing condition.

Power LED Indicator: OFF

Output LED Indicator: Slow flash (1Hz)

Remote Line

No action required; the sensor is ready for the first sensing condition.

2. Teach the first sensing condition.

Method

Action

Result

Push Button

Present the first (ON) sensing condition, then click the

push button.

Power LED Indicator: OFF

Output LED Indicator: Double-flash

Remote Line

Present the first sensing condition, then single-pulse the

remote line.

T

3. Teach the second sensing condition.

Method

Action

Result

Push Button

Present the second (OFF) sensing condition, then click the

push button.

TEACH Accepted

Power LED Indicator: Flashes 3 times, then

solid green

Output LED Indicator: OFF

The sensor returns to Run mode with the new

settings.

TEACH Not Accepted

Power LED Indicator: OFF

Output LED Indicator: Slow flash (1 Hz)

The sensor returns to the wait state, ready for

the first sensing condition.

Remote Line

Present the second sensing condition, then single-pulse

the remote line.

T

4

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 136564 Rev. E