数据搜索系统,热门电子元器件搜索
  Chinese  ▼
ALLDATASHEETCN.COM

X  

SMB30SC 数据表(PDF) 2 Page - Banner Engineering Corp.

部件名 SMB30SC
功能描述  R-GAGE짰 QT50R-AFS Sensor
PDF  7 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
制造商  BANNER [Banner Engineering Corp.]
网页  https://www.bannerengineering.com/us/en.html
标志 BANNER - Banner Engineering Corp.

SMB30SC 数据表(HTML) 2 Page - Banner Engineering Corp.

  SMB30SC Datasheet HTML 1Page - Banner Engineering Corp. SMB30SC Datasheet HTML 2Page - Banner Engineering Corp. SMB30SC Datasheet HTML 3Page - Banner Engineering Corp. SMB30SC Datasheet HTML 4Page - Banner Engineering Corp. SMB30SC Datasheet HTML 5Page - Banner Engineering Corp. SMB30SC Datasheet HTML 6Page - Banner Engineering Corp. SMB30SC Datasheet HTML 7Page - Banner Engineering Corp.  
Zoom Inzoom in Zoom Outzoom out
 2 / 7 page
background image
Overview
The R-GAGE sensor emits a well-defined beam of high-frequency radio
waves from an internal antenna. Some of this emitted energy is
reflected back to the receiving antenna. Signal processing electronics
determine the distance from the sensor to the object based on the
time delay of the return signal. The sensor can be configured (via DIP
switches) to sense objects up to a specific distance, ignoring objects
beyond this distance (also called background suppression).
D
X
Y
Setpoint
Figure 1. R-GAGE setpoint
Figure 2. R-GAGE features
1. Power LED: Green (power ON)
2. Signal Strength LED: Red (flashes in
proportion to the signal strength)
3. Output LEDs: Yellow (output energized);
Red (configuration)
Access the DIP switches behind the threaded cap
on the sensor back (not shown)
R-GAGE setpoint distances, minimum and maximum (sensor will detect objects up to setpoint and ignore objects beyond
the setpoint)
Description
Distance
X
Minimum setpoint distance
2 m (6.6 ft)
Y
Maximum setpoint distance
3.75 m (12.3 ft)
D
Dead Zone3
Sensor Configuration
The sensing zone distance, sensitivity, and output configuration can be selected via the DIP switches on the back of the
sensor. Use the included spanner to open the screw-off cover on the back of the sensor and access the DIP switches.
Important: Tighten the DIP switch cover a full quarter turn after contact to maintain the watertight
seal.
DIP Switch Functions
Switch
Function
1, 2, 3
Sensing distance (detects objects from sensor face to this point)
4, 5
Sensitivity (higher sensitivity sees weaker objects and has a larger beam pattern)
6
Normally open/normally closed output functionality
7, 8
Response Speed
DIP switch 1 is on the left and DIP switch 8 is on the right.
3 Typical dead zone: 0.4 m (1.3 ft) for moving and 1.0 m (3.3 ft) for stationary targets, but varies with target reflectivity
R-GAGE® QT50R-AFS Sensor
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 169603 Rev. E



Html Pages

1 2 3 4 5 6 7


数据表 下载

Go To PDF Page


链接网址



ALLDATASHEET是否为您带来帮助?  [ DONATE ] 

关于 Alldatasheet   |   广告服务   |   联系我们   |   隐私政策   |   数据表链接    |   链接交换   |   制造商名单
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com