| 数据搜索系统,热门电子元器件搜索 |
|
SMB30SC 数据表(PDF) 2 Page - Banner Engineering Corp. |
|
|
|||||||||||||||||||||||||||||
SMB30SC 数据表(HTML) 2 Page - Banner Engineering Corp. |
|
2 / 7 page ![]() Overview The R-GAGE sensor emits a well-defined beam of high-frequency radio waves from an internal antenna. Some of this emitted energy reflects back to the receiving antenna. Signal processing electronics in the sensor determine the distance from the sensor to the object based on the time delay of the return signal. The sensor can be configured (via DIP switches) to sense objects up to a specific distance, ignoring objects beyond this distance (also called background suppression). D X Y Setpoint Figure 1. R-GAGE Setpoint Figure 2. R-Gage Features 1. Power LED: Green (power ON) 2. Signal Strength LED: Red (flashes in proportion to the signal strength) 3. Output LEDs: Yellow (output energized); Red (configuration) Access the DIP switches behind the threaded cap on the sensor back (not shown) R-GAGE setpoint distances, minimum and maximum (sensor will detect objects up to setpoint and ignore objects beyond the setpoint) EU, KR Models TW, US Models X Minimum setpoint distance 2 m (6.6 ft) 3.5 m (11.5 ft) Y Maximum setpoint distance 24 m (78.7 ft) 24 m (78.7 ft) D Dead Zone3 Sensor Configuration The sensing zone distance, sensitivity, and output configuration can be selected via the DIP switches on the back of the sensor. Use the included spanner to open the screw-off cover on the back of the sensor and access the DIP switches. Important: Tighten the DIP switch cover a full quarter turn after contact to maintain the watertight seal. DIP Switch Functions Switch Function 1, 2, 3 Sensing distance (detects objects from sensor face to this point) 4, 5 Sensitivity (higher sensitivity sees weaker objects and has a larger beam pattern) 6 Normally open/normally closed output functionality 7, 8 Response Speed DIP switch 1 is on the left and DIP switch 8 is on the right. Distance Settings * Default settings 3 Typical dead zone: 0.4 m (1.3 ft) for moving and 1.0 m (3.3 ft) for stationary targets, but varies with target reflectivity R-GAGE® QT50R-AFH Sensor 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 162359 Rev. H |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |