Specifications

Supply Voltage and Current

One-color job light models: Less than 120 mA max current at 12 V dc

and less than 70 mA max current at 30 V dc (exclusive of load)

Two-color job light models: Less than 67 mA max current at 12 V dc;

less than 40 mA max current at 24 V dc; and less than 35 mA max

current at 30 V dc (exclusive of load)

Supply Protection Circuitry

Protected against reverse polarity and transient voltages (fast-transient

and overvoltage)

Output Configuration

1 current sinking (NPN) open collector transistor or 1 current sourcing

(PNP) open collector transistor, depending on model

Output Rating

Max. load: 150 mA

On-state saturation voltage: < 1.5 V at 150 mA

Off-state leakage current: < 10 μA

Output Protection Circuitry

All models protected against false pulse on power-up (outputs held OFF

for 1 second at power-up), overload and short-circuits.

Output Response Time

100 milliseconds ON/OFF

Indicators

2 green LED indicators: Power ON and Output Conducting

Base lights green, red or blue (depending on model and wiring) as a

job light when input line is enabled. One-color models may be wired for

flashing, rather than solid color operation.

Connections

PVC-jacketed 2 m (6.5 ft) cables or 4-pin M12/Euro-style QD fitting,

depending on model; integral 9 m (30 ft) cables are also available.

Accessory QD cables required for QD models.

Ambient Light Immunity

Up to 120,000 lux (direct sunlight)

EMI/RFI Immunity

Immune to EMI and RFI noise sources, per IEC 947-5-2

Construction

Totally encapsulated, non-metallic enclosure. Black polysulfone or red

polycarbonate upper housing (see Application Note below); translucent

white polycarbonate base. Electronics fully epoxy-encapsulated.

Operating Conditions

−20 °C to +50 °C (−4 °F to +122 °F)

90% at +55 °C maximum relative humidity (non-condensing)

Environmental Rating

Meets NEMA standards 1, 3, 4, 4X, 12, and 13; IEC IP66

Application Notes

Environmental considerations for models with polysulfone upper

housings: The polysulfone upper housing will become brittle with

prolonged exposure to outdoor sunlight. Window glass effectively filters

longer wavelength ultraviolet light and provides excellent protection

from sunlight. Avoid contact with strong alkalis. Clean periodically

using mild soap solution and a soft cloth.

Environmental considerations for models with polycarbonate upper

housings: Avoid prolonged exposure to hot water and moist high

temperature environments above 66° C (150° F). Avoid contact with

aromatic hydrocarbons (such as xylene and toluene), halogenated

hydrocarbons and strong alkalis. Clean periodically using mild soap

solution and a soft cloth.

Certifications

Required Overcurrent Protection

WARNING: Electrical connections must be

made by qualified personnel in accordance

with local and national electrical codes and

regulations.

Overcurrent protection is required to be provided by end product

application per the supplied table.

Overcurrent protection may be provided with external fusing or via

Current Limiting, Class 2 Power Supply.

Supply wiring leads < 24 AWG shall not be spliced.

For additional product support, go to http://

www.bannerengineering.com.

Supply Wiring

Required Overcurrent Protection

20

5.0 Amps

22

3.0 Amps

24

2.0 Amps

26

1.0 Amps

28

0.8 Amps

30

0.5 Amps

VTB Pick-to-Light Optical Touch Button

4

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 67570 Rev. E