GPS50M datasheet(3/4 Pages) BANNER

3 / 4 page

Specifications

Supply Voltage

3.6 t o 5.5 V dc

Current

Default sensing: 28 µAmps

Disabled sensing: 15 µAmps

Active comms: 4.7 mA

Mounting Threads

M 12 × 1

Indicators

Green

flashing: Power ON

Red

flicker: Serial Tx

Communication Hardware

Int erface: 1-w ire serial int erface

Baud rat es: 9.6k, 19.2k (default ), or 38.4k

Dat a format : 8 dat a bit s, no parit y (default ), 1 st op bit (even or odd parit y

available)

Communication Protocol

Sure Cross DX80 Sensor Node 1-Wire Serial Int erface

Communications Line

Level Receive ON: Great er t han 2 V

Level Receive OFF: Less t han 0.7 V

Level Transmit ON: 2.7 t o 3 V

Level Transmit OFF: 0 V (pulldow n resist or of 10 kOhm

Compatible Nodes

900 M Hz M odels

DX80N9X1S-P6

DX80N9X6S-P6

DX80DR9M -H6 and -H6L

DX80N9Q45TH

2.4 GHz M odels

DX80N2X1S-P6

DX80N2X6S-P6

DX80DR2M -H6 and -H6L

DX80N2Q45TH

Humidity

Humidit y measurement s are only available w it h t he M 12FTH4Q model. The

M 12FT4Q model does not include t he humidit y sensor.

M easuring Range: 0 t o 100%

relative humidity

Resolution: 0.1% relative humidity

Accuracy:

25 °C: ±2%

0 °C t o 70°C and 10–90%: ±3%

0 °C t o 70°C and 0–10 % or 90–100 %: ± 7%

Temperature

M easuring Range: –40 °C t o +85 °C (–40 °F t o +185 °F)

Resolution: 0.1 °C

Accuracy

–40 °C t o 0 °C: ± 0.6 °C

0 °C t o 60 °C: ± 0.4 °C

+60 °C t o +85°C: ± 1.2 °C

Environmental

Rating

IEC IP67; NEM A 6

Operating Temperature

–40 °C t o +85 °C (–40 °F t o +185 °F) 2

Shock and

Vibration

IEC 68-2-6 and IEC 68-2-27

Shock: 30g, 11 millisecond half sine w ave, 18 shocks

Vibration: 0.5 mm p-p, 10 to 60 Hz

Certifications

CSA: Class I, Division 2, Groups A, B, C, D —

Certificate 1921239

Refer t o t he Class I Division 2 cont rol draw ings (p/ n

143086) for w iring

specifications or limitations. All battery-powered devices must only use the

lit hium

battery manufactured by Xeno, model XL-205F.

Accessories

Temperature-Humidity Filter Caps

FTH-FIL-001

•

Aluminum grill

filter cap

(fact ory default , ships w it h

M 12FT* Q sensors)

FTH-FIL-002

•

St ainless st eel, sint ered t o

10 micromet er porosit y (for

high dust environment s.)

Euro-Style Cordsets - Double Ended

When using t he FlexPow er Node w it h int egrat ed

battery, use a double ended cordset. When using a FlexPower Node with external

pow er supply, use a single ended cordset . If using the

communication lines, the cable length cannot exceed 3 meters (10 ft).

Operating the devices at the maximum operating conditions for extended periods can shorten the life of the device.

Sure Cross® Temperat ure and Humidit y Sensor

P/ N 162669 Rev. G

w w w .bannerengineering.com - Tel: +1-763-544-3164

GPS50M 数据表(PDF) 3 Page - Banner Engineering Corp.

GPS50M 数据表(HTML) 3 Page - Banner Engineering Corp.

Html Pages

1 2 3 4

数据表下载