E5GN

E5GN

70

EMC

Emission Enclosure:

EN55011 Group 1 class A

Emission AC Mains:

EN55011 Group 1 class A

Immunity ESD:

EN61000-4-2:

4 kV contact discharge (level 2)

8 kV air discharge (level 3)

Immunity RF-interference:

ENV50140:

10 V/m (amplitude modulated,

80 MHz to 1 GHz) (level 3)

10 V/m (pulse modulated, 900 MHz)

Immunity Conducted Disturbance:

ENV50141:

10 V (0.15 to 80 MHz) (level 3)

Immunity Burst:

EN61000-4-4:

2 kV power-line (level 3)

2 kV I/O signal-line (level 4)

Approved standards

UL3121-1, CSA22.2 No. 14, E.B.1402C

Conforms to EN50081-2, EN50082-2, EN61010-1 (IEC61010-1)

J COMMUNICATIONS SPECIFICATIONS

Transmission path connection

Multiple points

Communications method (See Note)

RS-485 (two-wire, half duplex)

Synchronization method

Start-stop synchronization

Baud rate

1,200/2,400/4,800/9,600/19,200 bps

Transmission code

ASCII

Data bit length (See Note)

7 or 8 bits

Stop bit length (See Note)

1 or 2 bits

Error detection

Vertical parity (none, even, odd)

Frame check sequence (FCS): with SYSMAC WAY

Block check character (BCC): with CompoWay/F

Flow control

Not available

Interface (See Note)

RS-485

Retry function

Not available

Communications buffer

40 bytes

Note: The baud rate, data bit length, stop bit length, or vertical parity can be individually set using the communications setting level.

Nomenclature

CMW

STP

OUT

Temperature unit

No.1 display

Level key

Operation in-

dicators

No.2 display

Up key

Mode key

Down key