Functional Truth Table: PNP Models

LED Function

Pin 4 (Black Wire)

Pin 1 (Brown Wire)

Pin 2 (White Wire)

Color 1 On

+V dc

Pin 3 (blue wire) connected to ground (–) .

Alarm models: Alarm function is independent of

light functions.

Color 2 On

+V dc

Color 3 On

+V dc

Color 3 On (color 3 inhibits color 1)

+V dc

+V dc

Color 2 On (color 2 inhibits color 1)

+V dc

+V dc

Color 3 On (color 3 inhibits color 2)

+V dc

+V dc

Color 3 On (color 3 inhibits colors 1 & 2)

+V dc

+V dc

+V dc

Functional Truth Table: NPN Models

LED Function

Pin 4 (Black Wire)

Pin 3 (Blue Wire)

Pin 2 (White Wire)

Color 1 On

–V dc

Pin 1 (brown wire) connected to +V dc.

Alarm models: Alarm function is independent of

light functions.

Color 2 On

–V dc

Color 3 On

–V dc

Color 3 On (color 3 inhibits color 1)

–V dc

–V dc

Color 2 On (color 2 inhibits color 1)

–V dc

–V dc

Color 3 On (color 3 inhibits color 2)

–V dc

–V dc

Color 3 On (color 3 inhibits colors 1 & 2)

–V dc

–V dc

–V dc

Specifications

Supply Voltage and Current

18 V dc to 30 V dc

Indicators–maximum current per LED color:

•

100 mA at 18 V dc

•

70 mA at 30 V dc

Standard Audible Alarm: 25 mA maximum current

Sealed Audible Alarm: 35 mA maximum current

Omni-Directional Sealed Audible Alarm: 45 mA maximum current

Supply Protection Circuitry

Protected against reverse polarity and transient voltages

Indicator Response Time

Indicator On/Off: 10 milliseconds maximum

Audible Alarm

Standard Audible Alarm: 2.7 KHz ± 500 Hz oscillation frequency; maximum intensity

92 db at 1 meter (3.3 ft) (typical)

Sealed Audible Alarm: 2.9 KHz ± 250 Hz oscillation frequency; maximum intensity 94

db at 1 meter (3.3 ft) (typical)

Omni-Directional Sealed Audible Alarm: 2.1 KHz ± 250 Hz oscillation frequency;

maximum intensity 99 db at 1m (3.3 ft) (typical)

Omni-Directional Sealed Audible Alarm with Intensity Adjustment: 2.1 KHz ± 250 Hz

oscillation frequency; maximum intensity 95 dB at 1m (3.3 ft) (typical)

Indicators

LEDs or audible are independently selected

Indicator Characteristics

Color

Dominant Wavelength (nm) or Color

Temperature (CCT)

Lumen Output (Typical at

25 °C)

Green

525 nm

72

Red

625 nm

38

Yellow

590 nm

30

Blue

475 nm

28

White

5000 K

85

Audible Adjustment

Standard Audible Alarm: Unscrew the cover (up to 1.5 turns maximum) to adjust the

audible intensity. Do not exceed 1.5 turns or the cover may detach during operation.

For maximum intensity, rotate the center plug 180° counterclockwise to remove it.

Sealed Audible Alarm and Omni-Directional Sealed Audible Alarm with Intensity

Adjustment: Rotate the front cover until the desired intensity is reached

Typical Reduction in Sound Intensity with Audible Adjustment (maximum to minimum):

•

Standard Audible: 30 dB

•

Sealed Audible: 20 dB

•

Omni-Directional Sealed Audible: 12 dB

Construction

Bases and Covers: ABS

Light Segment: Polycarbonate

Vibration and Mechanical Shock

Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm amplitude, 5

minutes sweep, 30 minutes dwell)

Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms duration, half sine wave)

Operating Conditions

Non-Audible: –40 °C to +50 °C (–40 °F to +122 °F)

Standard and Sealed Audible: –20 °C to +50 °C (–4 °F to +122 °F)

95% at +50 °C maximum relative humidity (non-condensing)

Environmental Rating

UL Type 4X Indoor and UL Type 13

Non-Audible and Sealed Audible: IEC IP67

Standard Audible: IEC IP50

Certifications

Connections

Integral 4-pin or 5-pin M12/Euro-style quick disconnect, 150 mm (6 in) PVC cable with

a M12/Euro-style quick disconnect, or 2 m (6.5 ft) integral PVC cable, depending on

model

Models with a quick disconnect require a mating cordset

Required Overcurrent Protection

WARNING: Electrical connections must be made by

qualified personnel in accordance with local and

national electrical codes and regulations.

Overcurrent protection is required to be provided by end product application per the

supplied table.

Overcurrent protection may be provided with external fusing or via Current Limiting,

Class 2 Power Supply.

Supply wiring leads < 24 AWG shall not be spliced.

For additional product support, go to

www.bannerengineering.com.

Supply Wiring (AWG)

Required Overcurrent Protection (Amps)

20

5.0

22

3.0

24

2.0

26

1.0

28

0.8

30

0.5

CL50 Column Light

P/N 145315 Rev. O

www.bannerengineering.com - Tel: + 1 888 373 6767

3