Datasheet

• Solid-state LED matrix; select continuous or strobed operation via sensor software

Models

PresencePLUS P4 Sensor Models

Model

Color

Ambient Light Filter Kit

Polarizing Filter Kit

62 × 62 mm

80 × 80 mm

62 × 62 mm

80 × 80 mm

LEDIR62X62M

LEDIR80X80M

Infrared, 940 nm

FLTI

—

—

LEDRR62X62M

LEDRR80X80M

Visible Red, 630 nm

FLTR (included with

LEDRRPFK)

LEDRRPFKS

LEDRRPFK

LEDWR62X62M

LEDWR80X80M

White, All Visible

FLTB or FLTG

LEDBR62X62M

LEDBR80X80M

Blue, 464 to 475 nm

FLTB

LEDGR62X62M

LEDGR80X80M

Green, 520 to 540 nm

FLTG

Installing the Ring Light

The ring light bracket attaches to the top of the

PresencePLUS lens block, using the hardware kit provided.

Note: Before installing this light it is recommended that an ambient light filter be installed behind the lens. The filter improves

image quality by reducing unwanted ambient light.

Sensing Shiny Surfaces

To eliminate direct reflections without using polarizing filters, angle the sensor approximately 15° (or more) from perpendicular to a shiny surface.

Polarizing Kit

If it is necessary to mount the camera at a 90° angle to a shiny surface, the polarizing filter kit provides filters for both the LED ring light and sensor

to reduce the negative effects of strong, direct light reflections. The red filter kit (FLTR) is included with the polarizing kit. When light colors other than

red are used, discard the red filter in the polarizing kit and use the proper filter (see Models tables). The polarizing filters reduce the amount of light

returned to the sensor.

Clean the Light

Regularly remove dust, dirt, or fingerprints from the light source.

1. Blow off dust using anti-static compressed air.

2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris.

Important: Do not use any other chemicals for cleaning the light source.

LED..R..M Series Ring Lights

Original Document

116941 Rev. F

19 February 2019

116941