Datasheet

High-Intensity Sealed LED Ring Light for use with VE Series smart cameras

•

Rugged, waterproof IEC IP67 housing, for use with VE Series smart

cameras in wet or dirty environments

•

Six extremely bright LEDs for even illumination of targets

•

Continuous or strobed operation

•

Maintenance-free, rugged construction

•

Power, configure, and mount directly with VE Series smart cameras

•

Available with borosilicate glass or polycarbonate window

Models

The following sealed ring lights are compatible with all WVGA, 1.3 MP, and 2 MP models with lenses installed. The sealed ring

Model

LED Color

Window Construction

Connection

LEDIRV75BM

Infrared, 850 nm ±5 nm

Borosillicate Glass

350 mm (13.8 in) Pico 3-Pin Quick-

Disconnect

LEDRRV75BM

Visible red, 625 nm ±5 nm

LEDBRV75BM

Visible blue, 475 nm ±5 nm

LEDGRV75BM

Visible green, 525 nm +10 nm/-5 nm

LEDWRV75BM

Visible white, 6200K +500K/-550K

LEDIRV75PM

Infrared, 850 nm ±5 nm

Polycarbonate Plastic

LEDRRV75PM

Visible red, 625 nm ±5 nm

LEDBRV75PM

Visible blue, 475 nm ±5 nm

LEDGRV75PM

Visible green, 525 nm +10 nm/-5 nm

LEDWRV75PM

Visible white, 6200K +500K/-550K

Install the Ring Light

1

2

3

4

5

1. Remove the black thread protector (not shown) from the camera.

2. Remove the temporary imager cover (not shown).

3. Install and focus the C-mount lens (1).

4. Thread the filter (2), if using, onto the front of the lens.

Filters are recommended to improve image quality.

5. Fit a single o-ring (3) into the undercut area behind the camera threads.

sealed ring light is compatible with 75 mm focal lengths. The use of the LHWK-1 setscrew accessory kit is required for focus and aperture locking when

using a ring light.

VE Series LED High-Intensity Sealed Ring Light

Original Document

208788 Rev. B

1 November 2018

208788