Specifications

Supply Voltage and Current

Voltage supplied by

PresencePLUS P4 sensors, if operating at 24 V dc (see sensor

manual).

62 x 62 Models: Infrared — 24 V dc at 100 mA max.

80 x 80 Models: 24 V dc at 250 mA max.

All other colors — 24 V dc at 130 mA max.

Connections

300 mm (12 in) attached pigtail with 3-wire, 8 mm male Pico-style connector

Construction

Low-carbon steel with black zinc plating, acrylic window

Light Source

LED, see Models table for wavelengths

Illumination

High-intensity ring light

Useful Life

10,000 hours (LED ON time). When operated within specifications, output will

decrease less than 30% after 10,000 hours and less than 50% (less than 40% for red

and IR models) after 20,000 hours.

Operating Conditions

0 °C to +50 °C (+32 °F to +122 °F)

90% at +50 °C maximum relative humidity (non-condensing)

Certifications

Dimensions

All measurements are listed in millimeters [inches], unless noted otherwise.

66.1 mm

(2.6")

66.1 mm

(2.6")

33.0 mm

(1.3")

33.0 mm

(1.3")

33.3 mm

(1.31")

2 x Ø 4.4 mm

(2 x Ø 0.17")

ø 42.7 mm

(1.68")

Figure 1. 62 × 62 mm Models

87.3 mm

(3.44")

Ø 45.7 mm

(Ø 1.80")

43.6 mm

(1.72")

87.3 mm

(3.44")

42.9 mm

(1.69")

2 x Ø 4.4 mm

(2 x Ø 0.17")

Figure 2. 80 x 80 mm Models

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge,

any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the

improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER

PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR

FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner

Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such

purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this

document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is

provided in any other language. For the most recent version of any documentation, refer to:

www.bannerengineering.com.

For patent information, see

www.bannerengineering.com/patents.

LED..R..M Series Ring Lights