Sensing Shiny Surfaces

To eliminate direct reflections without using polarizing filters, angle the sensor approximately 15° (or more) from perpendicular to a shiny surface.

Polarizing Kit

If it is necessary to mount the camera at a 90° angle to a shiny surface, the polarizing filter kit provides filters for both the LED ring light and sensor

to reduce the negative effects of strong, direct light reflections. The red filter kit (FLTR) is included with the polarizing kit. When light colors other than

red are used, discard the red filter in the polarizing kit and use the proper filter (see Models tables). The polarizing filters reduce the amount of light

returned to the sensor.

Clean the Light

Regularly remove dust, dirt, or fingerprints from the light source.

1. Blow off dust using anti-static compressed air.

2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris.

Important: Do not use any other chemicals for cleaning the light source.

Specifications

Supply Voltage and Current

62 x 62 Models: Infrared — 24 V dc at 100 mA max.

80 x 80 Models: 24 V dc at 250 mA max.

All other colors — 24 V dc at 130 mA max.

Connections

PVC-jacketed 3-conductor 2 m (6.5 ft) or 9 m (30 ft) attached cable

Construction

Low-carbon steel with black zinc plating, acrylic window

Light Source

LED, see Models table for wavelengths

Illumination

High-intensity ring light

Useful Life

10,000 hours (LED ON time). When operated within specifications, output will

decrease less than 30% after 10,000 hours and less than 50% (less than 40% for red

and IR models) after 20,000 hours.

Operating Conditions

0 °C to +50 °C (+32 °F to +122 °F)

90% at +50 °C maximum relative humidity (non-condensing)

Certifications

Dimensions

33.3 mm

(1.31")

66.7 mm

(2.63")

66.7 mm

(2.63")

Ø 39.1 mm

(1.54")

104.1 mm

(4.10")

6.24 mm

(0.25")

58.2 mm

(2.30")

Figure 1. 62 × 62 mm Models for PresencePLUS Pro and ProII Sensor Models

86.1 mm

(3.40")

43.7 mm

(1.72")

86.1 mm

(3.40")

Ø 45.7 mm

(1.80")

109.9 mm

(4.33")

2 X 6.4 mm

(0.25")

58.4 mm

(2.30")

Figure 2. 80 × 80 mm Models for PresencePLUS Pro and ProII Sensor Models

LED..R..W Series Ring Lights

2

www.bannerengineering.com - Tel: + 1 888 373 6767

P/N 108626 Rev. H