Dimensions

Installing the Spot Light

NOTE: Before installing this spot light, install an ambient light filter behind the sensor lens. The filter improves

image quality by reducing unwanted ambient light.

Sensing Shiny Surfaces:

To eliminate direct reflections without using polarizing filters, angle the light approximately 15° (or

more) from perpendicular to a shiny surface.

Accessory Mounting Brackets

Spot light's standard 1/4 - 20 thread mounting hole is compatible with camera mounting bracket knuckle.

Model

Description

SMBPPK3

3" Column, Base, and Knuckle Kit

SMBPPK6

6" Column, Base, and Knuckle Kit

SMBPPK

Mounting Bracket Knuckle

SMBPPKB

Mounting Bracket Base

Model

Description

SMBPPKE3

Mounting Bracket Knuckle 3" Extension

SMBPPKE6

Mounting Bracket Knuckle 6" Extension

SMBPPLK

2" Mounting Knuckle Assembly

LED..SM Series Spot Lights

Warranty: Banner Engineering Corporation warrants its products to be free from defects

for a period of one year. Banner Engineering Corporation will repair or replace, free of

charge, any product of its manufacture found to be defective at the time it is returned to

the factory during the warranty period. This warranty does not cover damage or liability

for the improper application of Banner products. This warranty is in lieu of any other

warranty either expressed or implied.