Flat-Top Intensity Profile

0.00

0.20

0.40

0.60

0.80

1.00

Position (mm)

Fan Angle / Line Length

CP = Ratio of Areas defined by Fan Angle

and 13.5% width

100% of Line length for uniformity and straightness

100% of the

line is defined

at the 80% Clip

Profile will not

drop below 75%

Relative Intensity

Accessories

•

FLTMR-660 Red filter kit, 13.5 mm diameter, 1 mm thick, for iVu sensors

•

FLTR-660 Red filter kit, 13.5 mm diameter, 1 mm thick, for C-mount lenses

Brackets

SMBLLG

Mounting bracket with

heat sink

1/8” dia (2)

M3 X 0.5 THD INT (4)

4.3 mm

[0.17”]

50.8 mm

[2”]

42.7 mm

[1.68”]

8.1 mm

[0.32”]

15.49 mm

[0.61”]

14.36 mm

[0.57”]

R 11.94 mm

[0.47”]

R 9.625 mm

[0.38”]

31.5 mm

[1.24”]

47 mm

[1.85”]

37.5 mm

[1.48”]

14.6 mm

[0.58”]

3.8 mm

[0.15”]

30.6 mm

[1.2”]

21.5 mm

[0.85”]

6 mm

[0.24”]

27.5 mm

[1.09”]

15.5 mm

[0.61”]

SMBLLGS

Swivel mounting

bracket

30°

30°

O

0.750

1.500

0.750

0.750

1.000

TAP1/4-20 UNC,3HOLES

0.969

1.625

0.500

Laser Line Generator

P/N 171923 Rev. B

www.bannerengineering.com - tel: 763-544-3164

3